Omega cl310 User Manual page 5

1. Introduction
The Omega CL310 Multifunction Process Calibrator is a handheld,
battery-operated instrument that measures and sources electrical
and physical parameters. The calibrator has the following features
and functions:
• A dual display. The upper display is used for the measurement of
volts, current, and pressure. The lower display can be used to
measure volts, current, pressure, resistance temperature detectors
(RTDs), thermocouples, frequency, and resistance, and to source
pulse trains
• A thermocouple (TC) input/output terminal with automatic
reference-junction temperature compensation.
• Five setpoints in each range for increasing/decreasing output
• An interactive menu
• Complete RS232 interface for remote control
• Isolated read back for transmitter calibration.
• Documenting capability for up to 50 tags.
1.1 Customer Service
1.2 Standard Equipment
Check to see if your calibrator is complete. It should include:
CL310 Calibrator, Instruction Manual, Test Leads, Rubber Boot, RS-
232 cable, USB adapter cable, NIST Certificate, software CD.
1.3 Safety information
Symbols Used
The following table lists the International Electrical Symbols. Some or
all of these symbols may be used on the instrument or in this
manual.
Omega Engineering
One Omega Drive
Box 4047
Stamford, CT 06907-0047
Tel: (203) 359-1660
Fax: (203) 359-7900
www.omega.com
email: info@omega.com
1