Chrysler 2000 LHS Owner's Manual page 15

2000 LHS, 300M, CONCORDE AND INTREPID
4 INTRODUCTION
DESCRIPTION AND OPERATION (Continued)
• Refer to Vehicle Identification Number (VIN)
paragraph for proper breakdown of VIN code.
IF TWO BODY CODE PLATES ARE REQUIRED
The last code shown on either plate will be fol-
lowed by END. When two plates are required, the
last code space on the first plate will indicate (CTD)
When a second plate is required, the first four
spaces of each line will not be used due to overlap of
the plates.
MANUFACTURER PLATE
The Manufacturer Plate is located in the engine
compartment on the radiator closure panel cross-
member adjacent to the Body Code Plate. The plate
contains five lines of information:
1. Vehicle Identification Number (VIN)
2. Gross Vehicle Mass (GVM)
3. Gross Train Mass (GTM)
4. Gross Front Axle Rating (GFAR)
5. Gross Rear Axle Rating (GRAR)
LH