Chrysler 2006 300 Manual
  1. Manuals
  2. Brands
  3. Chrysler Manuals
  4. Automobile
  5. 2006 300
  6. Manual

Chrysler 2006 300 Manual

Chrysler new vehicle instrution manual
Hide thumbs Also See for 2006 300:
Table of Contents

Advertisement

Quick Links

Download this manual
SECTION
1

INTRODUCTION

2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
4
UNDERSTANDING YOUR INSTRUMENT PANEL
5
STARTING AND OPERATING
6
WHAT TO DO IN EMERGENCIES
7
MAINTAINING YOUR VEHICLE
8
MAINTENANCE SCHEDULES
9
IF YOU NEED CONSUMER ASSISTANCE
10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373
INDEX
TABLE OF CONTENTS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349
. . . . . . . . . . . . . . . . . . . . . . . . . . . 9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365
PAGE
1
2
3
4
5
6
7
8
9
10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2006 300 and is the answer not in the manual?

Questions and answers

Related Manuals for Chrysler 2006 300

Summary of Contents for Chrysler 2006 300

  • Page 1: Introduction

    TABLE OF CONTENTS SECTION ............. 3 INTRODUCTION THINGS TO KNOW BEFORE STARTING YOUR VEHICLE UNDERSTANDING THE FEATURES OF YOUR VEHICLE...

  • Page 3: Table Of Contents

    CONTENTS Introduction ......4 How To Use This Manual ....4 Warnings And Cautions .

  • Page 4: Introduction

    4 INTRODUCTION INTRODUCTION This manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a Warranty Information Booklet and various customer oriented documents. You are urged to read these publications carefully.
  • Page 5 INTRODUCTION 5...

  • Page 6: Warnings And Cautions

    The vehicle identification number (VIN) is located near the left front corner of the windshield. The VIN is visible from outside of the vehicle through the windshield. This number also appears on the Automobile Information VIN LOCATION Disclosure Label affixed to a window on your vehicle.

  • Page 7: Vehicle Modifications / Alterations

    INTRODUCTION 7 VEHICLE MODIFICATIONS / ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.

  • Page 9: Things To Know Before Starting Your Vehicle

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....11 Ignition Key Removal ....11 Key-In-Ignition Reminder .
  • Page 10 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Windows ..... . .26 Trunk Lock And Release ....29 Trunk Safety Warning .

  • Page 11: Things To Know Before Starting Your Vehicle 9

    A WORD ABOUT YOUR KEYS You can insert the double sided keys into the locks with either side up. Vehicle Key The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your dealer.

  • Page 12: Key-In-Ignition Reminder

    12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE vehicle information center (EVIC) — if equipped. Refer to Personal Settings in the Electronic Vehicle Information Center (EVIC) Section for details. WARNING! Leaving children in a vehicle unattended is danger- ous for a number of reasons. A child or others could be injured.

  • Page 13: Replacement Keys

    The Sentry Key Immobilizer System does not need to be armed or activated. Operation of the system is automatic regardless of whether or not the vehicle is locked or unlocked. During normal operation, the Vehicle Theft Alarm Indi- cator Light will come on for three (3) seconds immedi- ately after the ignition switch is turned on for a bulb check.

  • Page 14: Customer Key Programming

    14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE At the time of purchase, the original owner is provided with a four digit PIN number. This number is required for dealer replacement of keys. Duplication of keys may be performed at an authorized dealer or by using the Customer Key Programming procedure.

  • Page 15: General Information

    General Information The Sentry Key system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received, including interference that may cause undes- ired operation.

  • Page 16: Power Door Locks

    16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle always remove the key from the ignition lock, and lock your vehicle.
  • Page 17 Automatic Door Locks The doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 1. The Auto Lock feature is enabled. 2. The transmission is in gear. 3. All doors are closed. 4.
  • Page 18 18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Depress the power door lock switch to lock the doors. Power Door Lock Switch 4. A single chime will indicate the completion of the programming. Auto Unlock The doors will unlock automatically on vehicles with power door locks if: 1.

  • Page 19: Child Protection Door Lock

    Ignition Key Position 3. Depress the power door unlock switch to unlock the doors. 4. A single chime will indicate the completion of the programming. NOTE: Use the Auto Door Locks and Auto Unlock features in accordance with local laws. THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 Child Protection Door Lock To provide a safer environment for small children riding...

  • Page 20: Remote Keyless Entry

    20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To activate the system, open the rear door and move the child lock control, located near the door’s rear latch, to the ON position. Child Lock Control When the child lock system is engaged the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position.

  • Page 21: To Unlock The Doors

    Keyless Entry Transmitter To unlock the doors: Press and release the UNLOCK button on the transmitter once to unlock the driver’s door, or twice to unlock all doors. The turn signal lights will flash twice to acknowl- edge the unlock signal. The illuminated entry system also turns on.

  • Page 22: To Lock The Doors

    22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Pressing the LOCK button on the keyfob while you are inside the vehicle will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Security Alarm.

  • Page 23: General Information

    • When you turn off the panic alarm by pressing the PANIC button a second time, you may have to be closer to the vehicle due to the radio frequency noises of the system. To Turn Off “Flash Lights On Lock/Unlock” NOTE: The Flash Lights On Lock/Unlock feature can be turned on or off.

  • Page 24: Transmitter Battery Service

    24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If your Remote Keyless Entry transmitter fails to operate from a normal distance, check for these two conditions. 1. A weak battery in the transmitter. The expected life of the battery is a minimum of three years. 2.

  • Page 25: Vehicle Theft Alarm - If Equipped

    VEHICLE THEFT ALARM — IF EQUIPPED The Vehicle Theft Alarm system monitors the vehicle doors for unauthorized entry and the ignition switch for unauthorized operation. If something triggers the alarm, the system will prevent the vehicle from starting and provide the following audible and visual signals: the horn will pulse;...

  • Page 26: Windows

    26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Vehicle Theft Alarm system is designed to protect your vehicle, however, you can create conditions where the system will give you a false alarm. If one of the previously described arming sequences has occurred, the system will arm regardless of whether you are in the vehicle or not.
  • Page 27 The window lock switch on the driver’s door allows you to disable the window controls on the passenger doors. When the lock switch is pressed, the window controls on the passenger doors will not illuminate and the passen- ger windows will be disabled. WARNING! Never leave children in a vehicle, with the keys in the ignition switch.
  • Page 28 28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Up Feature with Anti–Pinch Protection — If Equipped Lift the window switch to the second detent, release, and the window will go up automatically. To stop the window from going all the way up during the auto-up operation, push down on the switch briefly.

  • Page 29: Trunk Lock And Release

    Reset Any time the vehicle battery is disconnected or goes dead the auto-up function will be disabled. To reactivate the auto-up feature perform the following steps after vehicle power is restored: 1. Pull the window switch up to close window com- pletely and continue to hold the switch up for an additional two seconds after the window is closed.

  • Page 30: Trunk Safety Warning

    30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The trunk lid can be released from outside the vehicle by pressing the trunk button on the Remote Keyless Entry Transmitter two times. With the ignition ON, the trunk open symbol will display in the instrument cluster indicating that the trunk is open.

  • Page 31: Trunk Emergency Release

    Trunk Emergency Release Emergency Release The trunk of your vehicle is equipped with an emergency release handle. It is located on the inside of the trunk lid, near the latch, and is coated so that it glows in a darkened trunk.

  • Page 32: Lap/Shoulder Belts

    32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buck- led up. You can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle.
  • Page 33 WARNING! • Wearing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body. These are the strongest parts of your body and can take the forces of a collision the best. Wearing your belt in the wrong place could make your injuries in a collision much worse.
  • Page 34 34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. •...
  • Page 35 WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as pos- sible and keep it snug.

  • Page 36: Seat Belt Pretensioners

    36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Adjustable Upper Shoulder Belt Anchorage In the driver and front passenger seats, the shoulder belt can be adjusted upward or downward to position the belt away from your neck. Push and fully depress the button above the webbing to release the anchorage, and then move it up or down to the position that serves you best.

  • Page 37: Enhanced Seat Belt Reminder System (Beltalert)

    are single use items. After a collision that is severe enough to deploy the airbags and pretensioners, both must be replaced. Enhanced Seat Belt Reminder System (BeltAlert) If the driver’s or front passenger’s seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5 mph (8 km/h), the Enhanced Warning System (BeltAlert) will alert the driver or front passenger to buckle their seat belt.

  • Page 38: Seat Belts And Pregnant Women

    38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Enhanced Warning System (BeltAlert) can be reacti- vated by repeating this procedure. NOTE: Although the Enhanced Warning System (BeltAlert) has been deactivated, the Seat Belt Warning Light will continue to illuminate while the driver’s or front passenger’s seat belt remains unbuckled.

  • Page 39: Driver And Right Front Passenger Supplemental Restraint System (Srs) - Airbag

    Driver and Right Front Passenger Supplemental Restraint System (SRS) - Airbag Front Airbag Components This vehicle has front airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s airbag is mounted in the center of the steering wheel.
  • Page 40 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE This vehicle may also be equipped with left and right side curtain airbags to protect the driver and passengers sitting next to a window. If the vehicle is equipped with side curtain airbags, they are located above the side windows.
  • Page 41 Along with the seat belts, front airbags work with the instrument panel knee bolsters to provide improved protection for the driver and front passenger. Side Cur- tain Airbags also work with seat belts to improve occu- pant protection. The seat belts are designed to protect you in many types of collisions.
  • Page 42 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. You should read the instructions provided with your child restraint to make sure that you are using it properly. 3. All occupants should use their seat belts properly. 4. The driver and front passenger seats should be moved back as far as practical to allow the airbags time to inflate.
  • Page 43 Air Bag System Components The airbag system consists of the following: • Occupant Restraint Controller • Airbag Warning Light • Driver Airbag • Passenger Airbag • Side Curtain Airbags above Side Windows (if equipped) • Side Remote Acceleration Sensors (if equipped) •...
  • Page 44 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Also, the ORC turns on the airbag warning light and PAD indicator light in the instru- ment panel for 6 to 8 seconds for a self-check when the ignition is first turned on. After the self-check, the airbag warning light will turn off.
  • Page 45 Passenger Airbag Disable Light The PAD indicator light should not be illuminated when teenagers, most children in a forward-facing child restraint or booster seats, most children that can properly wear the vehicle’s seat belt, and when an adult passenger is properly seated in the front passen- ger seat.
  • Page 46 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The OCS classifies an occupant using weight sensors mounted in the base of the front passenger seat. Any weight on the seat will be sensed by the system. Objects hanging on the seat or other passengers pushing down on the seat will also be sensed.
  • Page 47 Indicator Light and the Airbag Warning Light. Once the lodged object is removed, the fault will be automatically cleared after a short period of time. • The Driver and Passenger Airbag/Inflator Units are located in the center of the steering wheel and the right side of the instrument panel.
  • Page 48 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE milliseconds (about one quarter of the time it takes to blink your eyes) with enough force to injure you if you are not belted and seated properly, or if items are positioned in the area where the side curtain airbag inflates.
  • Page 49 WARNING! Unapproved modifications or service procedures to the front passenger seat assembly, its related compo- nents, or seat cover may inadvertently change the airbag deployment in case of a frontal crash. This could result in death or serious injury to the front seat passenger if the vehicle is involved in an acci- dent.
  • Page 50 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • It is not advisable to drive your vehicle after the airbags have been deployed. If you are involved in another collision, the airbags will not be in place to protect you. WARNING! Deployed airbags can’t protect you in another colli- sion.
  • Page 51 Airbag Light You will want to have the airbags ready to inflate for your protection in an impact. While the airbag system is designed to be mainte- nance free, if any of the following occurs, have an authorized dealer service the system promptly: •...
  • Page 52 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE treated confidentially. Confidential data will not be dis- closed by DaimlerChrysler to any third party except when: 1. Used for research purposes, such as to match data with a particular crash record in an aggregate database, provided confidentiality of personal data is thereafter preserved 2.
  • Page 53 WARNING! In a collision, an unrestrained child, even a tiny baby, can become a missile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured.
  • Page 54 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions ex- actly when installing an infant or child restraint.
  • Page 55 Older Children and Child Restraints Children who weigh more than 20 lbs (9 kg) and who are older than one year can ride forward-facing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing direction are for children who weigh 20 to 40 lbs (9 to 18 kg) and who are older than one year.
  • Page 56 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH-compatible child restraint systems are now avail- able. However, because the lower anchorages are to be introduced over a period of years, child restraint systems having attachments for those anchorages will continue to also have features for installation using the vehicle’s seat belts.
  • Page 57 The rear seat lower anchorages are round bars, located at the rear of the seat cushion where it meets the seat back. The location of the lower anchorages are identified by a symbol on the seat back. You will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces.
  • Page 58 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE restraint installation, instead of tucking the seat belt behind the child restraint, route the seat belt through the child restraint belt path and then buckle it. This should stow the seat belt out of the reach of an inquisitive child. Remind all children in the vehicle that the seat belts are not toys and should not be played with, and never leave your child unattended in the vehicle.
  • Page 59 Tether Strap Mounting 2. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. If your vehicle is equipped with adjustable rear head restraints, raise the head restraint and, where possible, route the tether strap under the head restraint and between the two posts.

  • Page 60: Engine Break-In Recommendations

    60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ENGINE BREAK-IN RECOMMENDATIONS A long break-in period is not required for the engine in your new vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable.

  • Page 61: Vehicle

    Safety Checks You Should Make Inside The Vehicle Seat Belts Inspect the belt system periodically, checking for cuts, frays and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system. Front seat belt assemblies must be replaced after a collision.

  • Page 63: Understanding The Features Of Your Vehicle

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors ......67 Inside Day/Night Mirror ....67 Automatic Dimming Inside Mirror —...
  • Page 64 64 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Seats ......90 Power Reclining Seats ....91 Lumbar Support .
  • Page 65 Windshield Washers ....107 Rain Sensing Wipers—If Equipped ..107 Mist Feature ......108 Headlights On With Wipers (Available With Auto Headlights Only) .
  • Page 66 66 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using HomeLink ..... 127 Erasing HomeLink Buttons ....127 Reprogramming a Single HomeLink Button .

  • Page 67: Mirrors

    MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view through the rear window. A two point pivot system allows for horizontal and vertical adjustment of the mirror. Adjusting Rearview Mirror Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of vehicle).

  • Page 68: Understanding The Features Of Your Vehicle

    68 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean. Driver’s Side Outside Mirror Auto Dimmer — If Equipped The driver’s side outside mirror automatically adjusts for annoying headlight glare from vehicles behind you.

  • Page 69: Power Remote-Control Mirrors

    WARNING! Vehicles and other objects seen in the right side convex mirror will look smaller and farther away than they really are. Relying too much on your right side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in this convex mirror.

  • Page 70: Illuminated Vanity Mirrors - If Equipped

    UConnect™ system. NOTE: The UConnect™ system use requires a cellular phone equipped with the Bluetooth Hands-Free Profile, version 0.96 or higher. See www.chrysler.com/uconnect for supported phones. UConnect™ allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle, and enables you to mute the system’s micro-...
  • Page 71 The UConnect™ system can be used with any Hands- Free Profile certified Bluetooth™ cellular phone. See www.chrysler.com/uconnect for supported phones. If your cellular phone supports a different profile (e.g., Headset Profile), you may not be able to use any UCon- nect™...

  • Page 72: Operations

    72 UNDERSTANDING THE FEATURES OF YOUR VEHICLE system can either be adjusted from the radio volume control knob, or from the steering wheel radio control (right switch), if so equipped. The radio display will be used for visual prompts from the UConnect™...
  • Page 73 Bluetooth™ enabled cellular phone. NOTE: The UConnect™ system use requires a cellular phone equipped with the Bluetooth Hands-Free Profile, version 0.96 or higher. See www.chrysler.com/uconnect for supported phones. To complete the pairing process, you will need to refer- ence your cellular phone owner’s manual.
  • Page 74 74 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • For identification purposes, you will be prompted to give the UConnect™ system a name for your cellular phone. Each cellular phone that is paired should be given a unique phone name. • You will then be asked to give your cellular phone a priority level between 1 and 7, 1 being the highest priority.
  • Page 75 • After the Ready prompt and the following beep, say the name of the person you want to call. For example, you can say John Doe, where John Doe is a previ- ously stored name entry in the UConnect™ phone- book.
  • Page 76 76 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the Ready prompt and the following beep, say Phonebook Edit. • You will then be asked for the name of the phonebook entry that you wish to edit. • Next, choose the number designation (home, work, mobile, or pager) that you wish to edit.

  • Page 77: Phone Call Features

    Delete All Entries in the UConnect™ Phonebook • Press the ’Phone’ button to begin. • After the Ready prompt and the following beep, say Phonebook Erase All. • The UConnect™ system will ask you to verify that you wish to delete all the entries from the phonebook. •...
  • Page 78 78 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cell phone.

  • Page 79: Uconnect™ System Features

    established, press and hold the ’Phone’ button until you hear a double beep indicating that the two calls have been joined into one conference call. Call Termination To end a call in progress, momentarily press the Phone’ button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call.
  • Page 80 80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Continue to follow the system prompts to complete language selection. After selecting one of the languages, all prompts and voice commands will be in that language. NOTE: After every UConnect™ language change op- eration, only the language specific 32 name phonebook is usable.
  • Page 81 NOTE: The Towing Assistance number dialed is based on the Country where the vehicle is purchased (1-800- 528-2069 for USA, 1-877-213-4525 for Canada, 55-14-3454 for Mexico city and 1-800-712-3040 for outside Mexico city in Mexico). Please refer to the 24-Hour “Towing Assistance” cover- age details in the Warranty information booklet and on the 24–Hour Towing Assistance Card.
  • Page 82 82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE a , you could press the ’Voice Recognition’ button and say Pair a Phone to select that option without having to listen to the rest of the voice prompt. Turning Confirmation Prompts On/Off Turning confirmation prompts off will stop the system from confirming your choices (e.g.

  • Page 83: Advanced Phone Connectivity

    • After the Ready prompt and the following beep, say Mute. In order to un-mute the UConnect™ system: • Press the ’Voice Recognition’ button. • After the Ready prompt and the following beep, say Mute-off. Information Service When using AT&T Wireless Service, dialing to phone number #121, you can access voice activated automated system to receive news, weather, stocks, traffic, etc.
  • Page 84 84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE button and say “Select” or “Delete.” Also, see the next two sections for an alternate way to “select” or “de- lete” a paired phone. Select another Cellular Phone This feature allows you to select and start using another phone with the UConnect™...

  • Page 85: Things You Should Know About Your Uconnect™ System

    Things You Should Know About Your UConnect™ System Voice Recognition (VR) • Always wait for the beep before speaking. • Speak normally, without pausing, just as you would speak to a person sitting approximately eight (8) feet away from you. •...
  • Page 86 86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, and • dry weather condition. •...
  • Page 87 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87...
  • Page 88 88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
  • Page 89 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89...

  • Page 90: Seats

    90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE North American English Primary Alternate(s) Zero Add location Add new All of them Confirmation prompts Confirmations prompts Delete a name Delete Language Select language List names List all List paired phones List phones Pager Beeper Phone pairing...

  • Page 91: Power Reclining Seats

    WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. CAUTION! Do not place any article under a power seat as it may cause damage to the seat controls.

  • Page 92: Lumbar Support

    92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lumbar Support This feature allows you to increase or decrease the amount of lumbar support. Turn the control lever for- ward to increase and rearward to decrease the desired amount of lumbar support. Lumbar Support Control Lever Heated Seats —...
  • Page 93 Pressing the switch a second time will select low-level heating. Pressing the switch a third time will shut the heating elements off. When high-temperature heating is selected, the heaters provide a boosted heat level during the first four minutes of operation after heating is activated. The heat output then drops to the normal high-temperature level.

  • Page 94: Head Restraints

    94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear. Adjustable restraints should be adjusted so that the upper edge is as high as practical.

  • Page 95: Driver Memory Seat

    WARNING! The cargo area in the rear of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children when the vehicle is in motion. They could be seriously injured in an accident. Children should be seated and using the proper restraint system.

  • Page 96: Programming The Remote Keyless Transmitter For The Memory Feature

    96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 1. Adjust all memory profile settings to desired prefer- ences (i.e. seat, side mirror, adjustable pedals [if equipped], power tilt and telescopic steering column [if equipped], and radio station presets). 2. Press and release the Set (S) button on the memory switch, then press the side of the rocker switch labeled (1) within 5 seconds.

  • Page 97: Easy Entry/Exit Seat (Available With Memory Seat Only)

    3. Press and release the Set (S) button on the memory switch, then press and release the side of the rocker switch labeled 1 or 2 accordingly. Memory Profile Set” (1 or 2) will display in the instrument cluster on vehicles equipped with the Electronic Vehicle Information Center (EVIC).

  • Page 98: Adjustable Pedals - If Equipped

    98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Easy Entry/Easy Exit feature is disabled when the vehicle is delivered from the factory. The Easy Entry/Easy Exit feature can be enabled or disabled through the programmable features in the Electronic Vehicle Information Center (EVIC).

  • Page 99: To Open And Close The Hood

    • The pedals cannot be adjusted when the vehicle is in R (Reverse) or when the Speed Control is ON. One of the following message will display in the Electronic Ve- hicle Information Center (EVIC) — if equipped if a pedal adjustment is attempted when the system is locked out: “Adjustable Pedal Disabled —...

  • Page 100: Lights

    100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Next, move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood. Hood Safety Catch Use the hood prop rod (if equipped) to secure the hood in the open position.

  • Page 101: Interior Lights

    Overhead Console Interior Lights The interior lights come on when a door is opened. To protect the battery, the interior lights will turn off automatically 10 minutes after the ignition switch is moved to the LOCK position. This will occur if the interior lights were switched on manually or are on because a door is open.

  • Page 102: Headlight Switch

    102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE odometer, Electronic Vehicle Information Center — if equipped, and radio when the parking lights or head- lights are on. Headlight Switch The headlight switch is located on the left side of the instrument panel. This switch controls the operation of the headlights, parking lights, instrument panel lights, instrument panel light dimming, interior lights, and fog lights.

  • Page 103: Headlights, Parking Lights, Instrument Panel Lights

    Headlights, Parking Lights, Instrument Panel Lights Rotate the headlight switch clockwise to the first detent for parking light and instrument panel light operation. Turn to the second detent for headlight, park light and instrument panel light operation. Headlight Switch UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 Automatic Headlights –...

  • Page 104: Smartbeams - If Equipped

    104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE SmartBeams — If Equipped The SmartBeam system provides increased forward light- ing at night by automating high beam control through the use of a digital camera mounted on the inside rearview mirror. This camera detects vehicle specific light and automatically switches from high beams to low beams until the approaching vehicle is out of view.

  • Page 105: Lights-On Reminder

    Lights-on Reminder If the headlights or parking lights are on after the ignition is turned OFF, a chime will sound to alert the driver when the driver’s door is opened. Headlight Time Delay This feature provides the safety of headlight illumination for 90 seconds (programmable) when leaving your ve- hicle in an unlighted area.

  • Page 106: Highbeam/Lowbeam Select Switch

    106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The message “Turn Signal On” will appear in the electronic vehicle information center (EVIC) — if equipped, and a continuous chime will be heard when the vehicle has been driven more than 1 mile (1.6 km) with either turn signal on.

  • Page 107: Windshield Washers

    Windshield Wiper/Washer Control Windshield Washers To use the front washer, push the lever in and hold while spray is desired. If the lever is released while in the delay range, the wiper will operate for two wipe cycles after the lever is released, and then resume the intermittent inter- val previously selected.

  • Page 108: Mist Feature

    108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The rain sensing feature may not function properly when ice, or dried salt water is present on the wind- shield. • Use of Rain-X or products containing wax or silicone may reduce rain sensor performance. •...

  • Page 109: Windshield Wiper Operation

    Windshield Wiper Operation Rotate the end of the lever to the second detent for Low speed wiper operation, or to the third detent for High speed operation. Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause be- tween cycles, desirable.

  • Page 110: Headlight Washers - If Equipped

    110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlight Washers — If Equipped This feature operates in combination with the windshield washers. To use the headlight washers, turn the head- lights ON and press in on the windshield washer control knob while the engine is running. Windshield Wiper/Washer Control This will operate the windshield washers and direct a timed high pressure spray onto the headlight lens.

  • Page 111: Tilt/Telescoping Steering Column

    Headlight Washer Fluid Reservoir TILT/TELESCOPING STEERING COLUMN Unlock the steering column by pulling out the handle located directly below the column. To tilt the column move the steering wheel up or down as desired. To lengthen or shorten the steering column pull out or push in the steering wheel.

  • Page 112: Power Tilt/Telescoping Steering Column - If Equipped

    112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER TILT/TELESCOPING STEERING COLUMN — IF EQUIPPED The power tilt/telescoping steering column lever is lo- cated below the multi-function lever on the steering column. To tilt the column move the lever up or down as desired.

  • Page 113: Traction Control System (Tcs) - If Equipped

    TRACTION CONTROL SYSTEM (TCS) — IF EQUIPPED WARNING! TCS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded. The TCS cannot prevent accidents, includ- ing those resulting from excessive speed in turns, or hydroplaning.

  • Page 114: Rear Park Assist System - If Equipped

    114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To improve the vehicle’s traction when driving with snow chains, or starting off in deep snow, sand or gravel, switch off the TCS system by pressing the traction control switch. Traction Control Switch To turn the system back ON, press the traction control switch a second time until the traction control Indicator turns OFF.
  • Page 115 When the driver selects Reverse the system scans for objects behind the vehicle using four sensors located in the rear bumper. Objects can be detected from up to 71 inches (180 cm). A warning display above the rear window provides both visible and audible warnings indicating the range of the object.

  • Page 116: Brake Assist System (Bas) - If Equipped

    116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Rear Park Assist System displays the outer most yellow LED’s at a slightly dimmer level to indicate that the system is ON. NOTE: When an audio tone is indicated by the Rear Park Assist display the system will MUTE the radio if it is turned on.

  • Page 117: Electronic Stability Program (Esp) - If Equipped

    WARNING! BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. The BAS cannot prevent accidents, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning.
  • Page 118 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The ESP enhances directional control and reduces driving wheel spin of the vehicle under various driving condi- tions. The system operates when the vehicle speed is greater than 7.8 mph (12.6 km/h). The ESP system corrects for over/understeering of the vehicle by applying brakes to the appropriate wheel.

  • Page 119: Synchronizing Esp

    wheel slip control is active at vehicle speeds between approximately 24 mph (40 km/h) and 50 mph (80 km/h). CAUTION! If the vehicle is towed with the front axle raised, the engine must be shut off (key in the ignition switch to the OFF/LOCK or ACC position).

  • Page 120: To Activate

    120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Activate: Push and release the speed control lever (“ON/ OFF”) once and the electronic speed control indicator light in the instrument cluster will illuminate indicating that the electronic speed control is ON. To turn the system OFF, Push and release the lever (“ON/OFF”) again and the system and indica- tor will turn off.

  • Page 121: To Accelerate For Passing

    To decrease speed while speed control is set, push the lever down and hold (“COAST”). Release the lever when the desired speed is reached, and the new speed will be set. Pushing down and releasing the lever (“COAST”) once will result in a 1 mph (2 km/h) speed decrease. Each time the lever is pushed down and released, speed decreases.

  • Page 122: Overhead Console - If Equipped

    122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE OVERHEAD CONSOLE — IF EQUIPPED The overhead console contains courtesy/reading lights, an optional universal garage door opener (HomeLink ), storage for sunglasses, and an optional power sunroof switch. Overhead Console Courtesy/Reading Lights At the forward end of the console are two courtesy/ reading lights.

  • Page 123: Garage Door Opener - If Equipped

    GARAGE DOOR OPENER — IF EQUIPPED The HomeLink Universal Transceiver replaces up to three remote controls (hand held transmitters) that oper- ate devices such as garage door openers, motorized gates, or home lighting. It triggers these devices at the push of a button. The Universal Transceiver operates off your vehicle’s battery and charging system;...

  • Page 124: Programming Homelink

    124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Programming HomeLink NOTE: When programming a garage door opener, it is advised to park outside the garage. It is also recom- mended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLink for quicker training and accurate transmis- sion of the radio-frequency signal.
  • Page 125 HomeLink Buttons 2. Position the end of your hand-held transmitter 1-3 inches (3-8 cm) away from the HomeLink buttons. 3. Simultaneously press and hold both the HomeLink button that you want to train and the hand-held trans- mitter buttons. Do not release the buttons until step 4 has been completed.

  • Page 126: Canadian Programming/Gate Programming

    126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE door opener may have a multiple security code system (rolling code system). Please proceed to steps 6–8 to complete the programming of a rolling code equipped device (most common garage door openers require this step.

  • Page 127: Using Homelink

    3. Continue to press and hold the HomeLink button while you press and release every two seconds ( cycle ) your hand-held transmitter until the frequency signal has successfully been accepted by HomeLink. The EVIC display will show “Channel X Trained” (where X is Channel 1, 2, or 3).

  • Page 128: Security

    128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Security If you sell your vehicle, be sure to erase the frequencies by following the “Erasing HomeLink Buttons” instruc- tions in this section. This device complies with part 15 of FCC rules and with RSS-210 of Industry Canada.

  • Page 129: Opening Sunroof - Express

    WARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. •...

  • Page 130: Pinch Protect Override

    130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pinch Protect Override If a known obstruction (ice, debris, etc.) prevents closing, press the switch forward and hold for two seconds after the reversal occurs. This allows the sunroof to move towards the closed position. NOTE: Pinch protection is disabled while the switch is pressed.

  • Page 131: Ignition Off Operation

    Ignition Off Operation For vehicles not equipped with the Electronic Vehicle Information Center (EVIC), the power sunroof switch will remain active for 10 minutes after the ignition switch is turned off. Opening either front door will cancel this feature. For vehicles equipped with the EVIC, the power sunroof switch will remain active for up to 60 minutes after the ignition switch is turned off.
  • Page 132 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If desired, the power outlet next to the ash receiver tray (if equipped) can be converted by your authorized dealer to provide power with the ignition switch in the LOCK position. Front Power Outlet The center console outlet is powered directly from the battery (power available at all times).

  • Page 133: Electrical Outlet Use With Engine Off

    Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e. cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting.

  • Page 134: Front Seat Cup Holders - 300 Touring And 300C Models

    134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Seat Cup Holders — 300 Touring and 300C Models The cup holders are located in the forward edge of the center console. Push down on the cover as shown to expose the cup holders.

  • Page 135: Storage

    STORAGE Console Features The center console contains a large storage bin. The storage bin contains a four-slot coin holder (designed to hold various size coins) and a rubber mat at the bottom of the bin for noise control. The bin is large enough to hold a portable AC/DC converter to power laptops, games, or other electrical equipment.

  • Page 136: Load Leveling System - If Equipped

    136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Always place cargo evenly on the cargo floor. Put heavier objects as low and as far forward as possible. • Place as much cargo as possible in front of the rear axle. Too much weight or improperly placed weight over or behind the rear axle can cause the rear of the vehicle to sway.

  • Page 137: Understanding Your Instrument Panel

    UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS Instruments And Controls ....140 Standard Instrument Cluster ....141 Premium Instrument Cluster .
  • Page 138 138 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Radio Mode ..165 Operation Instructions - CD Mode ..168 Operation Instructions - Auxiliary Mode ..169 Operating Instructions - Hands Free Phone —...
  • Page 139 Selecting a Channel ....184 Storing And Selecting Pre-Set Channels ..185 Using The PTY (Program Type) Button (If Equipped) .

  • Page 140: Instruments And Controls

    140 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENTS AND CONTROLS...

  • Page 141: Standard Instrument Cluster

    UNDERSTANDING YOUR INSTRUMENT PANEL 141 STANDARD INSTRUMENT CLUSTER...

  • Page 142: Premium Instrument Cluster

    142 UNDERSTANDING YOUR INSTRUMENT PANEL PREMIUM INSTRUMENT CLUSTER...

  • Page 143: Instrument Cluster Descriptions

    INSTRUMENT CLUSTER DESCRIPTIONS 1. Electronic Speed Control Indicator Light — If Equipped This light will illuminate when the electronic speed control is ON. 2. Low Fuel Indicator Light When the fuel level drops to 1/8 tank, the fuel symbol will light and a single chime will sound. 3.
  • Page 144 144 UNDERSTANDING YOUR INSTRUMENT PANEL 9. Anti-Lock Brake Light This light monitors the Anti-Lock Brake System. The light will turn on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required.
  • Page 145 The dual brake system provides a reserve braking capac- ity in the event of a failure to a portion of the hydraulic system. Failure of either half of the dual brake system is indicated by the Brake Warning Light which will turn on when the brake fluid level in the master cylinder has dropped below a specified level.

  • Page 146: Understanding Your Instrument Panel 137

    146 UNDERSTANDING YOUR INSTRUMENT PANEL 13. Electronic Stability Program (ESP) Indicator Light/Traction Control System (TCS) Indicator Light — If Equipped If this indicator light flashes during accelera- tion, apply as little throttle as possible. While driving, ease up on the accelerator. Adapt your speed and driving to the prevailing road conditions, and do not switch off the ESP, or TCS —...
  • Page 147 15. Trip Odometer Button Trip Odometer Button — Standard Cluster The word TRIP will appear when this button is pressed. Push in and hold the button for two seconds when the trip odometer is displayed to reset it to 0 miles or kilometers.
  • Page 148 148 UNDERSTANDING YOUR INSTRUMENT PANEL 21. Electronic Throttle Control (ETC) Light This light informs you of a problem with the Electronic Throttle Control system. If a prob- lem is detected the light will come on while the engine is running. Cycle the ignition key when the vehicle has completely stopped and the gear selector is placed in the PARK position.
  • Page 149 Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. 23.

  • Page 150: Electronic Vehicle Information Center (Evic)

    150 UNDERSTANDING YOUR INSTRUMENT PANEL ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) Electronic Vehicle Information Center The Electronic Vehicle Information Center (EVIC) fea- tures a driver-interactive display. It is located in the upper part of the cluster between the speedometer and tachometer. Vehicles equipped with steering wheel mounted buttons (described in this section) are also equipped with the EVIC.

  • Page 151: Electronic Vehicle Information Center (Evic) Displays

    Press the FUNCTION SELECT button to accept a selection. The FUNCTION SELECT button also advances the radio to the next preset station, changes the side of the tape being FUNC- played (if so equipped), or changes the current TION CD track being played (if so equipped) when SELECT Button the EVIC is in the Compass/Temp/Audio...
  • Page 152 152 UNDERSTANDING YOUR INSTRUMENT PANEL • Memory System Disabled – Vehicle Not In Park (with a single chime) • Memory System Disabled – Seat Belt Buckled (with a single chime) • Personal Settings Not Available – Vehicle Not in Park •...

  • Page 153: Trip Functions

    • Check Gascap (refer to “Adding Fuel” in Section 5 of this manual for more details) • Service Park Assist System (with a single chime) Trip Functions Press and release the MENU button until one of the following Trip Functions displays in the EVIC: •...

  • Page 154: Compass Display

    154 UNDERSTANDING YOUR INSTRUMENT PANEL • When the DTE value is less than 30 miles (48 km) estimated driving distance, the DTE display will change to a text display of LOW FUEL. This display will continue until the vehicle runs out of fuel. Adding a significant amount of fuel to the vehicle will turn off the LOW FUEL text and a new DTE value will display.
  • Page 155 UNDERSTANDING YOUR INSTRUMENT PANEL 155 Manual Compass Calibration If the compass appears erratic and the “CAL” message does not appear in the EVIC display, you must put the compass into the Calibration Mode manually as follows: To put into a Calibration Mode: Turn on the ignition switch.

  • Page 156: Telephone - If Equipped

    156 UNDERSTANDING YOUR INSTRUMENT PANEL To set the variance: Turn the ignition switch ON. Then, press and hold the compass button for approximately 2 seconds. Then, press the SCROLL button until “Compass Variance” displays in the EVIC. Both the “Compass Variance”...

  • Page 157: Navigation - If Equipped

    The EVIC displays this symbol to indicate that you have voice mail. Voice Mail The EVIC displays this symbol to indicate a text message. Text Message The EVIC displays this symbol to indicate the battery strength of the UConnect™ phone. Battery Strength The EVIC displays this symbol to indicate that...

  • Page 158: Personal Settings (Customer Programmable Features)

    158 UNDERSTANDING YOUR INSTRUMENT PANEL Turn By Turn Directions The EVIC displays turn-by-turn directions to a pro- grammed destination when Turn by Turn Navigation is enabled through Personal Settings. When enabled, the EVIC displays the name of the approaching road at the top of the screen, followed by an arrow to indicate the direction to turn the vehicle, and a count down to indicate the distance to the turn.
  • Page 159 “Remote Key Unlock” When Driver Door 1st Press is selected, only the driver’s door will unlock on the first press of the remote keyless entry unlock button. When Driver Door 1st Press is selected, you must press of the remote keyless entry unlock button twice to unlock the passenger’s doors.
  • Page 160 160 UNDERSTANDING YOUR INSTRUMENT PANEL “Delay Power Off to Accessories Until Exit” When this feature is selected, the power window switches, radio, hands–free system (if equipped), DVD video system (if equipped), power sunroof (if equipped), and power outlets will remain active for up to 60 minutes after the ignition switch is turned off.
  • Page 161 “Rain Sensing Intermittent Wipers” — If Equipped When ON is selected, the system will automatically activate the windshield wipers if it senses moisture on the windshield. To make your selection, press and release the FUNCTION SELECT button until “ON” or “OFF” appears.

  • Page 162: Setting The Analog Clock

    162 UNDERSTANDING YOUR INSTRUMENT PANEL “Headlights On With Wipers” (Available with Auto Headlights Only) When ON is selected, and the headlight switch is in the AUTO position, the headlights will turn on approxi- mately 10 seconds after the wipers are turned on. The headlights will also turn off when the wipers are turned off if they were turned on by this feature.

  • Page 163: Radio General Information

    RADIO GENERAL INFORMATION Radio Broadcast Signals Your new radio will provide excellent reception under most operating conditions. Like any system, however, car radios have performance limitations, due to mobile op- eration and natural phenomena, which might lead you to believe your sound system is malfunctioning. To help you understand and save you concern about these “ap- parent”...

  • Page 164: Sales Code Ref - Am/Fm/Cd (Single Disc) Radio With Optional Satellite Radio And Hands Free Phone Capability

    164 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: For vehicles equipped with the Electronic Ve- hicle Information Center (EVIC), the radio, steering wheel radio controls (if equipped), and 6 disc CD/DVD changer (if equipped) will remain active for up to 60 minutes after the ignition switch is turned off. Opening either front door will cancel this feature.

  • Page 165: Operating Instructions - Radio Mode

    Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Press the ON/VOL control to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping.
  • Page 166 166 UNDERSTANDING YOUR INSTRUMENT PANEL equipped) frequencies, pausing for 5 seconds at each listenable station before continuing to the next. To stop the search, press SCAN a second time. PSCAN Button (Radio Mode) Pressing the PSCAN button, causes the tuner to scan through preset stations, in either AM, FM or Satellite (if equipped) frequencies, pausing for 5 seconds at each preset station before continuing to the next.
  • Page 167 Press the rotary TUNE control a third time and TREB will be displayed. Turn the TUNE control to the right or left to increase or decrease the Treble tones. Press the rotary TUNE control a fourth time and BAL will be displayed.

  • Page 168: Operation Instructions - Cd Mode

    168 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - CD Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Inserting The Compact Disc (Single CD Player) Gently insert one CD into the CD player with the CD label facing up.

  • Page 169: Operation Instructions - Auxiliary Mode

    TIME Button (CD Mode) Press this button to change the display from elapsed CD playing time to time of day. The time of day will be displayed for 5 seconds. RW/FF (CD Mode) Press and hold the FF (Fast Forward) and the CD player will begin to fast forward until FF is released.

  • Page 170: Operating Instructions - Hands Free Phone - If Equipped

    170 UNDERSTANDING YOUR INSTRUMENT PANEL MUTE Button (Auxiliary Mode) Press the MUTE button to cancel the sound from the speakers. MUTE will be displayed. Press the MUTE button a second time and the sound from the speakers will return. Rotating the volume control or turning OFF the ignition will also return the sound from the speakers.

  • Page 171: Sales Code Rak - Am/Fm/Cassette/Cd (6-Disc) Radio With Optional Satellite Radio, Hands Free Phone, Video, Mp3, And Wma Capabilities

    SALES CODE RAK – AM/FM/CASSETTE/CD (6-DISC) RADIO WITH OPTIONAL SATELLITE RADIO, HANDS FREE PHONE, VIDEO, MP3, and WMA CAPABILITIES NOTE: The radio sales code is located on the lower right side of your radio faceplate. RAK Radio UNDERSTANDING YOUR INSTRUMENT PANEL 171 Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
  • Page 172 172 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Button (Radio Mode) Press and release the SEEK button to search for the next station in either AM/FM or Satellite (if equipped) mode. Press the right side of the button to seek up and the left side to seek down.
  • Page 173 RW/FF (Radio Mode) Pressing the rewind/fast forward button causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either AM, FM or Satel- lite (if equipped) frequencies. TUNE Control (Radio Mode) Turn the right side rotary control to increase or decrease the frequency.
  • Page 174 174 UNDERSTANDING YOUR INSTRUMENT PANEL Turn the tune knob to select the following format types: 16 Digit-Character Dis- Program Type No program type or un- defined News Information Sports Talk Rock Classic Rock Adult Hits Soft Rock Top 40 Country Oldies Soft Nostalgia...

  • Page 175: Operating Instructions - Tape Player

    Buttons 1 - 6 (Radio Mode) These buttons tune the Radio to the stations that you commit to push-button memory {12 AM, 12 FM, and 12 Satellite (if equipped) stations}. Operating Instructions — Tape Player Insert the cassette with the exposed tape side toward the left and the mechanical action of the player will gently pull the cassette into the play position.

  • Page 176: Changing Tape Direction

    176 UNDERSTANDING YOUR INSTRUMENT PANEL Changing Tape Direction If you wish to change the direction of tape travel (side being played), press Preset 6. The lighted arrow in the display window will show the new direction. Metal Tape Selection If a standard metal tape is inserted into the player, the player will automatically select the correct equalization.

  • Page 177: Load/Eject Button (Cd Mode For Cd Audio Play)

    Inserting Compact Disc(s) CAUTION! This CD player will accept 4 3/4 inch (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. You may eject a disc with the radio OFF. If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc.
  • Page 178 178 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the LOAD/EJT button for 5 seconds and all CDs will be ejected from the radio. If you have ejected a disc and have not removed it within 15 seconds, it will be reloaded. If the CD is not removed, the radio will continue to play the non-removed CD.

  • Page 179: Notes On Playing Mp3 Files

    Press the RND button a second time to stop Random Play. Buttons 1 - 6 (CD MODE for CD Audio Play) Selects disc positions 1 - 6 for Play/Load/Eject. Notes On Playing MP3 Files The radio can play MP3 files, however, acceptable MP3 file recording media and formats are limited.
  • Page 180 180 UNDERSTANDING YOUR INSTRUMENT PANEL Supported MP3 File Formats The radio will recognize only files with the *.mp3 exten- sion as MP3 files. Non-MP3 files named with the *.mp3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.

  • Page 181: Operation Instructions - (Cd Mode For Mp3 And Wma Audio Play)

    To increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. To create a single-session disc, enable the Disc at Once option before writing to the disc. Operation Instructions - (CD Mode for MP3 and WMA Audio Play) SEEK Button (CD Mode for MP3 and WMA Play) Pressing the right side of the SEEK button plays the next...
  • Page 182 182 UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button (CD Mode for MP3 Play) Press and INFO button while playing MP3 or WMA disc. The radio scrolls through the following TAG information: Song Title, Artist, File Name, and Folder Name (if avail- able).

  • Page 183: Satellite Radio - If Equipped

    Operating Instructions - Video Entertainment System (VES) (If Equipped) Refer to separate “Video Entertainment System (VES) Guide.” SATELLITE RADIO — IF EQUIPPED Satellite radio uses direct satellite to receiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius™ Satel- lite Radio.

  • Page 184: Selecting Satellite Mode In Ref, Raq, And Rak Radios

    184 UNDERSTANDING YOUR INSTRUMENT PANEL ESN/SID Access With RAQ and RAK Radios With the ignition switch in the ACCESSORY position and the radio OFF, press the CD Eject and TIME buttons simultaneously for 3 seconds. All twelve ESN/SID num- bers will be displayed. The radio will exit the ESN/SID mode when any other button is pushed, the ignition is turned OFF, or 5 minutes has passed since any button was pushed.

  • Page 185: Storing And Selecting Pre-Set Channels

    NOTE: Channels that may contain objectionable con- tent can be blocked. Contact Sirius Customer Care at 888-539-7474 to discuss options for channel blocking or unblocking. Please have your ESN/SID information available. Storing and Selecting Pre-Set Channels In addition to the 12 AM and 12 FM pre-set stations, you may also commit 12 satellite stations to push button memory.

  • Page 186: Reception Quality

    186 UNDERSTANDING YOUR INSTRUMENT PANEL Reception Quality Satellite reception may be interrupted due to one of the following reasons. • The vehicle is parked in an underground parking structure or under a physical obstacle. • Dense tree coverage may interrupt reception in the form of short audio mutes.
  • Page 187 UNDERSTANDING YOUR INSTRUMENT PANEL 187 Raising The DVD Screen Remote Control Location...

  • Page 188: Navigation System (Sales Code Rec) - If Equipped

    188 UNDERSTANDING YOUR INSTRUMENT PANEL NAVIGATION SYSTEM (SALES CODE REC) — IF EQUIPPED NOTE: The radio sales code is located on the lower right side of your radio faceplate. Navigation Radio with CD Player and MP3 Capability (REC) - combines a Global-Positioning System-based navigation system with a color screen to provide maps, turn identification, selection menus and instructions for selecting a variety of destinations and routes.

  • Page 189: Remote Sound System Controls

    REMOTE SOUND SYSTEM CONTROLS The remote sound system controls are located on the surface of the steering wheel at the 3 and 9 o’clock positions. Electronic Vehicle Information Center Vehicles equipped with steering wheel mounted buttons are also equipped with the Electronic Vehicle Information Center (EVIC).

  • Page 190: Radio Operation

    190 UNDERSTANDING YOUR INSTRUMENT PANEL When the EVIC is in the Compass/Temp/ Audio screen, press the FUNCTION SELECT button to advance the radio to the next preset station, to change the side of the tape being FUNC- played (if so equipped), or to change the cur- TION rent CD track being played (if so equipped).

  • Page 191: Satellite Radio Operation

    Press either the top or bottom of the SCROLL button twice to listen to the second track on the CD, three times to listen to the third track, and so forth. Satellite Radio Operation Press the top of the SCROLL button once to SEEK the next listenable station up from the current setting.

  • Page 192: Cd/Dvd Disc Maintenance

    192 UNDERSTANDING YOUR INSTRUMENT PANEL CD/DVD DISC MAINTENANCE To keep the CD/DVD discs in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge.
  • Page 193 The instrument panel features four dual-vane airflow registers. Two registers are located on the outer ends of the instrument panel and two are located in the center of the instrument panel. These registers can be closed to partially block airflow. Manual Temperature Controls Press this button to turn on and off the air condi- tioning.
  • Page 194 194 UNDERSTANDING YOUR INSTRUMENT PANEL Blower Control The rotary knob on the left controls the blower and can be set in one of four speeds and OFF. The blower fan mo- tor will remain on until the system is turned to the OFF position or the ignition is turned OFF.
  • Page 195 Defrost/Floor Air flows through the front and rear floor outlets and the outlets at the base of the windshield. Air is also directed to the front door windows through the side window demister grilles. Floor Air flows through the floor outlets located under the instrument panel and into the rear seating area through vents under the front seats.

  • Page 196: Automatic Temperature Control - If Equipped

    196 UNDERSTANDING YOUR INSTRUMENT PANEL Automatic Temperature Control — If Equipped The Infrared Dual-Zone Climate Control System auto- matically maintains the interior comfort level desired by the driver and passenger. This is accomplished by a dual sun-sensor in the top of the instrument panel, and an infrared sensor located in the face of the control unit.
  • Page 197 Operation of the system is quite simple. Begin by turning the right mode knob to AUTO, and place the blower control (left knob) to either LO AUTO or HI AUTO. The LO AUTO position should be used for front seat occu- pants only.
  • Page 198 198 UNDERSTANDING YOUR INSTRUMENT PANEL • Most of the time, when in Automatic operation, you can temporarily put the system into recirculation mode by pressing the Recirc button. However, under certain conditions in automatic the system is blowing air out of the defrost vents. When these conditions are present and the Recirc button is pressed the indicator will flash and remain off.
  • Page 199 UNDERSTANDING YOUR INSTRUMENT PANEL 199...
  • Page 200 200 UNDERSTANDING YOUR INSTRUMENT PANEL The operator can override the AUTO mode setting and select the direction of the air by rotating the right mode knob to one of the following positions. • Defrost Air is directed to the windshield through the outlets at the base of the windshield.

  • Page 201: Summer Operation

    the rear window defroster is ON. The defroster automati- cally turns off after approximately 10 minutes of opera- tion for the first push of the button, and will turn off after approximately 5 minutes for the second push of the button.

  • Page 202: Winter Operation

    202 UNDERSTANDING YOUR INSTRUMENT PANEL Winter Operation Use of the air Recirculation mode during winter months is not recommended because it may cause window fogging. NOTE: See Operating Tips chart (for Manual A/C Control) at the end of this section for suggested control settings in different weather conditions.

  • Page 203: Operating Tips

    UNDERSTANDING YOUR INSTRUMENT PANEL 203 Operating Tips...

  • Page 205: Starting And Operating

    STARTING AND OPERATING CONTENTS Starting Procedures ....208 Normal Starting ..... . 208 Engine Block Heater —...
  • Page 206 206 STARTING AND OPERATING Tire Identification Number (TIN) ..238 Tire Loading And Tire Pressure ... 239 Tires—General Information ....243 Tire Pressure .
  • Page 207 Overloading ......261 Loading ......261 Trailer Towing .

  • Page 208: Starting And Operating

    208 STARTING AND OPERATING STARTING PROCEDURES CAUTION! Long periods of engine idling, especially at high engine speeds, can cause excessive exhaust tempera- tures which can damage your vehicle. Do not leave your vehicle unattended with the engine running. WARNING! Do not leave animals or children inside parked vehicles in hot weather;...
  • Page 209 WARNING! • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way. Un- burned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle.

  • Page 210: Engine Block Heater - If Equipped

    210 STARTING AND OPERATING After Starting The idle speed will automatically decrease as the engine warms up. ENGINE BLOCK HEATER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather. Connect the cord to a standard 110-115 volt AC electrical outlet with a grounded, three-wire extension cord.
  • Page 211 WARNING! It is dangerous to shift the selector lever out of “P” or “N” if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in re- verse.
  • Page 212 212 STARTING AND OPERATING The following indicators should be used to ensure that you have engaged the transmission shift lever into the P (Park) position: • When shifting into P (Park) move the lever all the way forward until it stops, and is fully seated. •...
  • Page 213 Overdrive and shifting operation will resume when the temperature of the transmission reaches the appropriate temperature. Refer to the “Note” under “Torque Con- verter Clutch” later in this section. If the transmission temperature gets too hot, the transmission may downshift out of Overdrive or en- gage overdrive at higher vehicle speeds until the transmission cools down.
  • Page 214 214 STARTING AND OPERATING Torque Converter Clutch A feature designed to improve fuel economy has been added to the automatic transmission of this vehicle. A clutch within the torque converter engages automatically at calibrated speeds. This may result in a slightly differ- ent feeling or response during normal operation in high gear.

  • Page 215: Speed Automatic Transmission

    NOTE: Even if the transmission can be reset, we recommend that you visit a dealer at your earliest possible convenience. Your dealer has diagnostic equip- ment to determine if the problem could recur. If the transmission cannot be reset, dealer service is required.
  • Page 216 216 STARTING AND OPERATING Park Position The PARK position is to be used when parking the vehicle. Engage only with the vehicle stopped. The PARK position is not intended to serve as a brake when the vehicle is parked. Rather, the driver should always use the parking brake in addition to placing the selector lever in PARK to secure the vehicle.
  • Page 217 Neutral No power is transmitted from the engine to the drive axle. When the brakes are released, the vehicle can be moved freely (pushed or towed). Do not engage in NEUTRAL position while driving except to coast when the vehicle is in danger of skidding (e.g., on icy roads). The engine may be started in this range.
  • Page 218 218 STARTING AND OPERATING NOTE: To avoid overrevving the engine when the selector lever is moved in “D -” direction, the transmis- sion will not shift to a lower gear if the engine’s revolu- tions per minute limit would be exceeded. Briefly press the selector lever in the “D +”...
  • Page 219 A reset feature is available to allow the vehicle to be driven to a dealer for service. To reset the transmission, use the following procedure: 1. Stop the vehicle. 2. Move the selector lever to the PARK position. 3. Turn off the engine. 4.

  • Page 220: Automatic Transmission - General Information

    220 STARTING AND OPERATING Automatic Transmission — General Information CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
  • Page 221 • If there is a need to restart your engine be sure to cycle the key to the LOCK position before restarting. Trans- mission engagement may be delayed up to 10 seconds after restart if the key is not cycled to the LOCK position first.

  • Page 222: Autostick - If Equipped

    222 STARTING AND OPERATING To rock a vehicle out of soft ground (mud or snow), alternately shift from forward to reverse, while applying only slight acceleration. Rocking a vehicle free in this manner may cause the ABS or traction system malfunc- tion indicator light to come on.

  • Page 223: Parking Brake

    You can shift in or out of the autostick mode at any time without taking your foot off the accelerator pedal. If you choose the Overdrive mode, the transmission will oper- ate automatically; shifting between the five available gears. When you wish to engage autostick, simply move the shift lever to the Right or Left (D+/D-) position while in DRIVE.
  • Page 224 224 STARTING AND OPERATING To release the parking brake, pull out on the parking brake release located on the left side of the instrument panel. Parking Brake Release When parking on a hill, it is important to set the parking brake before placing the gear selector in Park, otherwise the load on the transmission locking mechanism may make it difficult to move the selector out of park.

  • Page 225: Brake System

    BRAKE SYSTEM In the event power assist is lost for any reason (for example, repeated brake applications with the engine off), the brakes will still function. The effort required to brake the vehicle will be much greater than that required with the power system operating.
  • Page 226 226 STARTING AND OPERATING WARNING! • Anti-lock system (ABS) cannot prevent the natu- ral laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency be- yond that afforded by the condition of the vehicle brakes and tires or the traction afforded.
  • Page 227 ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can in- clude ice, snow, gravel, bumps, railroad tracks, loose debris, or panic stops. You also may experience the following when the brake system goes into Anti-lock: •...

  • Page 228: Power Steering

    228 STARTING AND OPERATING POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason, the power assist is interrupted, it will still be possible to steer your vehicle.

  • Page 229: Multi Displacement System (Mds) - 5.7L Engine Only

    MULTI DISPLACEMENT SYSTEM (MDS) - 5.7L Engine Only This feature offers improved fuel economy by shutting off four of the engine’s eight cylinders during light load and cruise conditions. The system is automatic with no driver inputs or additional driving skills required. NOTE: The MDS system may take some time to return to full functionality after a battery disconnect.

  • Page 230: Tire Pressure Monitor System - If Equipped

    230 STARTING AND OPERATING TIRE PRESSURE MONITOR SYSTEM — IF EQUIPPED Tire Pressure Monitoring — Base System The Tire Pressure Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressure levels (EXCLUDING THE SPARE TIRE).

  • Page 231: Tire Pressure Monitoring - Premium System

    CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equip- ment that is not of the same size, type, and/or style. After-market wheels can cause sensor damage.
  • Page 232 232 STARTING AND OPERATING The Tire Pressure Monitoring Telltale Light will illuminate in the instrument cluster, and an au- dible chime will be activated when one or more tire pressures is low. The Tire Pressure Monitoring Tell- tale Light will flash on and off for 10 to 60 seconds when a system fault is detected.

  • Page 233: Check Tpm System

    LEFT FRONT, LEFT REAR, RIGHT FRONT, RIGHT REAR LOW PRESSURE One or more of these messages will be displayed in the EVIC if a low tire pressure condition exists in one or more tires. Inspect all tires for proper inflation pressure, once the proper tire pressure has been set, the TPMS warning will reset automatically when the vehicle has been driven for at least 2 minutes at or above 15 mph (24 km/h).

  • Page 234: General Information

    234 STARTING AND OPERATING NOTE: • The TPMS can inform the driver of a low tire pressure condition. • The TPMS is not intended to replace normal tire care and maintenance, nor to provide warning of a tire failure or condition. •...
  • Page 235 • European Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter P is absent from this tire size designation. Example: 215/65R15 96H •...
  • Page 236 236 STARTING AND OPERATING Tire Sizing Chart Size Designation: P = Passenger car tire size based on U.S. design standards ...blank... = Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = Section Width in Millimeters (mm)
  • Page 237 Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry. H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions. —The maximum speed corresponding to the Speed Symbol should only be achieved un- der specified operating conditions.

  • Page 238: Tire Identification Number (Tin)

    238 STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire however the date code may only be on one side. Tires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire.

  • Page 239: Tire Loading And Tire Pressure

    Tire Loading and Tire Pressure Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar. Tire Placard Location STARTING AND OPERATING 239 Tire and Loading Information Placard Tire and Loading Information This placard tells you important information about the:...
  • Page 240 240 STARTING AND OPERATING Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the “Tire and Loading Information”...
  • Page 241 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle.
  • Page 242 242 STARTING AND OPERATING...

  • Page 243: Tires-General Information

    WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES—GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.

  • Page 244: Tire Inflation Pressures

    244 STARTING AND OPERATING 2. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement. Underinflation also increases tire rolling resistance and results in higher fuel consumption.
  • Page 245 CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap–if equipped. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressure”.

  • Page 246: Radial-Ply Tires

    246 STARTING AND OPERATING WARNING! High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your tires could cause them to fail. You could have a serious accident. Don’t drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h).

  • Page 247: Limited Use Spare - If Equipped

    Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare. Do not install more than one compact spare tire/wheel on the vehicle at any given time. CAUTION! Because of the reduced ground clearance, do not take your vehicle through an automatic car wash with the...

  • Page 248: Tread Wear Indicators

    248 STARTING AND OPERATING WARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 35 mph (55 km/h) when you are stuck. And don’t let anyone near a spinning wheel, no matter what the speed.

  • Page 249: Life Of Tire

    Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • Tire pressure • Distance driven WARNING! Tires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure.

  • Page 250: Alignment And Balance

    250 STARTING AND OPERATING WARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combina- tions of unapproved tires and wheels may change suspension dimensions and performance charac- teristics, resulting in changes to steering, han- dling, and braking of your vehicle.

  • Page 251: Tire Chains

    TIRE CHAINS Use only compact chains, or other traction aids that meet SAE type “Class S” specifications. Chains must be the proper size for the vehicle, as recommended by the chain manufacturer. NOTE: Do not use tire chains on a compact spare tire. STARTING AND OPERATING 251 CAUTION! To avoid damage to your vehicle or tires, observe the...

  • Page 252: Snow Tires

    252 STARTING AND OPERATING NOTE: In order to avoid damage to tires, chains, and your vehicle do not drive for a prolonged period of time on dry pavement. Observe the tire chain manufacturer’s instructions on method of installation, operating speed, and conditions for usage.

  • Page 253: Fuel Requirements

    Follow the recommended tire rotation frequency for your type of driving found in the “Maintenance Schedules” Section of this manual. More frequent rotation is permis- sible if desired. The reasons for any rapid or unusual wear should be corrected prior to rotation being per- formed.

  • Page 254: Spark Knock

    If you experience these symptoms, try another brand of “regular” gasoline be- fore considering service for the vehicle. Over 40 automobile manufacturers around the world have issued and endorsed consistent gasoline specifica- tions (the World Wide Fuel Charter, WWFC) to define fuel properties necessary to deliver enhanced emissions, engine performance, and durability for your vehicle.

  • Page 255: Mmt In Gasoline

    CAUTION! DO NOT use gasolines containing Methanol. Use of these blends may result in starting and driveability problems and may damage critical fuel system com- ponents. Problems that result from using methanol/gasoline blends are not the responsibility of the manufacturer. While MTBE is an oxygenate made from Methanol, it does not have the negative effects of Methanol.

  • Page 256: Fuel System Cautions

    256 STARTING AND OPERATING Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law. Using leaded gasoline can impair engine performance, or damage the emission control system. •...

  • Page 257: Adding Fuel

    • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period. If the vehicle is stopped in an open area with the engine running for more than a short period, adjust the ventilation system to force fresh, outside air into the vehicle.
  • Page 258 258 STARTING AND OPERATING NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler cap door reinforcement. Gas Cap Tether Hook CAUTION! Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap), and may result in a malfunction indicator light on the instrument clus- ter.
  • Page 259 NOTE: • Tighten the gas cap until you hear a “clicking” sound. This is an indication that the gas cap is properly tightened. If the gas cap is not secured properly the Malfunction Indicator Light in the instrument cluster will turn on. Make sure that the gas cap is tightened each time the vehicle is refueled.

  • Page 260: Vehicle Loading

    260 STARTING AND OPERATING VEHICLE LOADING The load carrying capacity of your vehicle is shown in the charts that follow. This information should be used for passenger and luggage loading as indicated. If the seatbacks are folded for carrying cargo, do not exceed the specified GVWR and GAWR.

  • Page 261: Overloading

    Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and front and rear GAWR. The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for operation.

  • Page 262: Trailer Towing

    262 STARTING AND OPERATING Empty Weight Load (Including driver, pass- sengers and cargo) Total GAWR NOTE: Refer to the Vehicle Certification Label attached to the rear of the driver’s door for your vehicle’s GVWR and GAWRs. This table is only an example. TRAILER TOWING Front Rear Axle...
  • Page 263 Gross Trailer Weight (GTW) The gross trailer weight (GTW) is the weight of the trailer plus the weight of all cargo, consumables and equipment (permanent or temporary) loaded in or on the trailer in its loaded and ready for operation condition. The recom- mended way to measure GTW is to put your fully loaded trailer on a vehicle scale.

  • Page 264: Trailer Hitch Classification

    264 STARTING AND OPERATING Weight-Distributing Hitch A weight-distributing hitch includes a receiver attached to the tow vehicle, plus a removable hitch head and spring bar assembly that fits into the receiver opening and hook up brackets that connect the spring bars to the trailer frame.
  • Page 265 Engine/Transmission Frontal Area 2.7L Automatic 22 SQ. FT. (2.04 square 22 SQ. FT. (2.04 square 22 SQ. FT. (2.04 square 22 SQ. FT. (2.04 square 3.5L & 5.7L Automatic 32 SQ. FT. (2.97 square 32 SQ. FT. (2.97 square 32 SQ. FT. (2.97 square 32 SQ.

  • Page 266: Trailer And Tongue Weight

    266 STARTING AND OPERATING Trailer and Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle.

  • Page 267: Towing Requirements

    Towing Requirements To promote proper break-in of your new vehicle driv- etrain components the following guidelines are recom- mended: CAUTION! • Avoid towing a trailer for the first 500 miles (805 km) of vehicle operation. Doing so may damage your vehicle. •...
  • Page 268 268 STARTING AND OPERATING • Vehicles with trailers should not be parked on a grade. When parking, apply the parking brake on the tow vehicle. Put the tow vehicle automatic transmission in P for Park. Always, block or chock the trailer wheels. •...
  • Page 269 − An electronically actuated trailer brake controller is required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required. − Trailer brakes are recommended for trailers over 1,000 lbs (454 kg) and required for trailers in excess of 2,000 lbs (907 kg).
  • Page 270 270 STARTING AND OPERATING The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations. 7 - Pin Connector 4 - Pin Connector...

  • Page 271: Towing Tips

    Towing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. Towing Tips — Automatic Transmission The “D” range can be selected when towing. However, if frequent shifting occurs while in this range, the “3” range should be selected.

  • Page 272: Recreational Towing (Behind Motorhome, Etc.)

    272 STARTING AND OPERATING − Extended driving at high RPM should be avoided to prevent excess heat generation. A reduction in vehicle speed may be required to avoid extended driving at high RPM. Return to a higher gear range or vehicle speed when road conditions and RPM level allows.

  • Page 273: What To Do In Emergencies

    WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flasher ....274 If Your Engine Overheats ....274 Jacking And Tire Changing .

  • Page 274: Hazard Warning Flasher

    274 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER The hazard flasher switch is located in the center of the instrument panel between the center air outlets. Hazard Flasher Switch To engage the Hazard Warning Flashers, depress the switch on the instrument panel. When the Hazard Warn- ing Switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emer- gency.

  • Page 275: Jacking And Tire Changing

    NOTE: There are steps that you can take to slow down an impending overheat condition. If your air conditioner is on, turn it off. The air conditioning system adds heat to the engine cooling system and turning off the A/C removes this heat.

  • Page 276: Preparations For Jacking

    276 WHAT TO DO IN EMERGENCIES WARNING! Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack.

  • Page 277: Jack Location/Spare Tire Stowage

    WHAT TO DO IN EMERGENCIES 277 • Remove the fastener securing the spare tire. Jack Location/Spare Tire Stowage The jack and spare tire are both stowed under an access cover in the trunk. Follow these steps to access the jack and spare tire.

  • Page 278: Jacking And Changing A Tire

    278 WHAT TO DO IN EMERGENCIES • Remove the spare tire. • Remove the fastener securing the jack. Jack Fastener Jacking and Changing a Tire 1. Block the wheel diagonally opposite the flat tire. Passengers should not remain in the vehicle when the vehicle is being jacked.
  • Page 279 WARNING! To avoid possible personal injury, handle the wheel covers with care to avoid contact with the metal edges and retention teeth. 4. Before raising the vehicle loosen, but do not remove, the lug nuts of the flat tire using the lug wrench. Turn the wheel nuts counterclockwise one turn while the wheel is still on the ground.
  • Page 280 280 WHAT TO DO IN EMERGENCIES Jack Engagement Locations...

  • Page 281: Compact Spare Tire

    7. Remove the lug nuts, wheel cover (if equipped) and tire. Remove the cover by hand, do not pry off. 8. Mount the spare tire. For vehicles equipped with wheel covers, see the wheel cover installation instruc- tions. Do not attempt to install a wheel cover on a compact spare.

  • Page 282: Wheel Cover Installation (If Required)

    282 WHAT TO DO IN EMERGENCIES Wheel Cover Installation (If Required) 1. Tighten the two lug nuts on the mounting studs on each side of the stud which is in alignment with the valve stem. 2. Align the valve notch in the wheel cover with the valve stem on the wheel.
  • Page 283 WARNING! • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way. Un- burned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle.

  • Page 284: Driving On Slippery Surfaces

    284 WHAT TO DO IN EMERGENCIES 4. Connect one end of the jumper cable to the remote jump start positive battery post (A) in the engine com- partment. Connect the other end of the same cable to the positive terminal of the booster battery. Refer to the following illustration for jump starting connections.

  • Page 285: Traction

    WARNING! Rapid acceleration on slippery surfaces is danger- ous. Unequal traction can cause sudden pulling of the rear wheels. You could lose control of the vehicle and possibly have an accident. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow, wet mud, loose sand, etc.).

  • Page 286: Towing A Disabled Vehicle

    286 WHAT TO DO IN EMERGENCIES WARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 35 mph (55 km/h) when you are stuck.

  • Page 287: Without The Ignition Key

    CAUTION! • Do not attempt to tow this vehicle from the front with sling type towing equipment. Damage to the front fascia will result. • The only approved method of towing is with a flat bed truck. • Do not tow the vehicle from the rear. Damage to the rear sheet metal, and fascia will occur.

  • Page 289: Maintaining Your Vehicle

    MAINTAINING YOUR VEHICLE CONTENTS 2.7L Engine ......292 3.5L Engine ......293 5.7L Engine .
  • Page 290 290 MAINTAINING YOUR VEHICLE Body Lubrication ..... 309 Windshield Wiper Blades ....310 Windshield Washers/Headlight Washers —...
  • Page 291 Fluids And Capacities ....344 Fluids, Lubricants And Genuine Parts ..345 MAINTAINING YOUR VEHICLE 291 Engine .

  • Page 292: Maintaining Your Vehicle

    292 MAINTAINING YOUR VEHICLE 2.7L ENGINE 2.7L Engine Compartment...

  • Page 293: L Engine

    MAINTAINING YOUR VEHICLE 293 3.5L ENGINE 3.5L Engine Compartment...

  • Page 294: 5.7L Engine

    294 MAINTAINING YOUR VEHICLE 5.7L ENGINE 5.7L Engine Compartment...

  • Page 295: Onboard Diagnostic System - Obd Ii

    ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emis- sions well within current government regulations.

  • Page 296: Emissions Inspection And Maintenance Programs

    296 MAINTAINING YOUR VEHICLE EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requirement to pass an inspection of your vehicle’s emissions control system. Failure to pass could prevent vehicle registration. For states which have an I/M (Inspection and Maintenance) requirement, this check verifies the following: the MIL (Malfunction Indicator Light) is functioning and is not on when the engine is running,...

  • Page 297: Replacement Parts

    If your OBD system is not ready, you should see your authorized dealer or repair facility. If your vehicle was recently serviced or had a battery failure or replacement, you may need to do nothing more than drive your vehicle as you normally would in order for your OBD system to update.

  • Page 298: Maintenance Procedures

    298 MAINTAINING YOUR VEHICLE WARNING! You can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
  • Page 299 Engine Oil Dipstick CAUTION! Overfilling or underfilling will cause oil aeration or loss of oil pressure. This could damage your engine. Checking Oil Level — 5.7L Engines To assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop.
  • Page 300 300 MAINTAINING YOUR VEHICLE CAUTION! Overfilling or underfilling will cause oil aeration or loss of oil pressure. This could damage your engine. CAUTION! Operating the engine with the oil levels below the safe zone, or operating with oil levels that exceed the top of the safe zone may cause engine damage.
  • Page 301 recommends engine oils that are API certified and meet the requirements of DaimlerChrysler Material Standard MS-6395. Use Mopar or an equivalent oil meeting the specification MS-6395. American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API).
  • Page 302 302 MAINTAINING YOUR VEHICLE engine oil viscosity chart. SAE 5W-30 Engine Oil is allowed for use in the 3.5L Engine during cold weather only to improve cold weather starting. 10W-30 OIL VISCOSITY CHART The engine oil filler cap also shows the recommended engine oil viscosity for your engine.

  • Page 303: Engine Oil Filter

    environment. Contact your dealer, service station, or governmental agency for advice on how and where used oil and oil filters can be safely discarded in your area. Engine Oil Filter The engine oil filter should be replaced at every engine oil change.

  • Page 304: Engine Air Cleaner Filter

    304 MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter Under normal driving conditions, replace the air filter at the intervals shown on Schedule “A.” If, however, you drive the vehicle frequently under dusty or severe con- ditions, the filter element should be inspected periodi- cally and replaced if necessary at the intervals shown on Schedule “B.”...
  • Page 305 CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involv- ing engine misfire or other apparent loss of perfor- mance, have your vehicle serviced promptly. Contin- ued operation of your vehicle with a severe malfunction could cause the converter to overheat, resulting in possible damage to the converter and the...

  • Page 306: Maintenance-Free Battery

    306 MAINTAINING YOUR VEHICLE To minimize the possibility of catalyst damage: • Do not shut off the engine or interrupt the ignition when the transmission is in gear and the vehicle is in motion. • Do not try to start engine by pushing or towing the vehicle.

  • Page 307: Air Conditioner Maintenance

    WARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water.

  • Page 308: A/C Air Filter - If Equipped

    308 MAINTAINING YOUR VEHICLE WARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to Section 3 of the Warranty Information book for further warranty information.

  • Page 309: Power Steering - Fluid Check

    Refer to the “Maintenance Schedules” section of this manual for the recommended air conditioning filter replacement intervals. Power Steering — Fluid Check Checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated.

  • Page 310: Windshield Wiper Blades

    310 MAINTAINING YOUR VEHICLE underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated. The external lock cylinders should be lubricated twice a year, preferably in the fall and spring. Apply a small amount of a high quality lubricant such as Mopar Lock Cylinder Lubricant or equivalent directly into the lock cylinder.

  • Page 311: Exhaust System

    The fluid reservoir will hold 1 gallon (3.8L) of washer fluid when the message “Low Washer Fluid” appears in the Electronic Vehicle Information Center (EVIC) — if equipped. Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system.

  • Page 312: Cooling System

    312 MAINTAINING YOUR VEHICLE Cooling System WARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position.
  • Page 313 Cooling System — Drain, Flush and Refill At the intervals shown on the Maintenance Schedules, the system should be drained, flushed and refilled. If the solution is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner.
  • Page 314 314 MAINTAINING YOUR VEHICLE Adding Coolant Your vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to 5 Years or 100,000 miles (160 000 km) before replacement. To prevent reducing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle.
  • Page 315 WARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system.

  • Page 316: Hoses And Vacuum/Vapor Harnesses

    316 MAINTAINING YOUR VEHICLE Points To Remember NOTE: When the vehicle is stopped after a few miles (kilometers) of operation, you may observe vapor coming from the front of the engine compartment. This is nor- mally a result of moisture from rain, snow, or high humidity accumulating on the radiator and being vapor- ized when the thermostat opens, allowing hot coolant to enter the radiator.

  • Page 317: Brakes

    Pay particular attention to those hoses nearest to high heat sources such as the exhaust manifold. Inspect hose routing to be sure hoses do not come in contact with any heat source or moving component which may cause heat damage or mechanical wear. Insure nylon tubing in these areas has not melted or collapsed.

  • Page 318: Brake Fluid Level Check

    318 MAINTAINING YOUR VEHICLE NOTE: Often, fluid such as oil, power steering fluid, and brake fluid are used during assembly plant opera- tions to facilitate the assembly of hoses to couplings. Therefore, oil wetness at the hose-coupling area is not necessarily an indication of leakage.

  • Page 319: Fuel System Hoses

    Use only manufacturers recommended brake fluid, refer to Fluids, Lubricants and Genuine Parts for correct fluid type. WARNING! • Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. •...

  • Page 320: Automatic Transmission

    320 MAINTAINING YOUR VEHICLE Automatic Transmission Fluid Level Check Regular automatic transmission fluid level checks are not required. For this reason the dipstick is omitted. If you notice fluid loss or gear shift malfunction, have your authorized dealer check the transmission fluid level. CAUTION! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deterioration...

  • Page 321: All Wheel Drive (Awd) - If Equipped

    All Wheel Drive (AWD) — If Equipped The all wheel drive system consists of a Transfer Case, and Front Differential. The exterior surface of these components should be inspected for evidence of fluid leaks. Confirmed leaks should be repaired as soon as possible.
  • Page 322 322 MAINTAINING YOUR VEHICLE hot or cold weather and other extreme conditions will have an adverse effect on paint, metal trim, and under- body protection. The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion resistance built into your vehicle. What Causes Corrosion? Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle.
  • Page 323 Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month. • It is important that the drain holes in the lower edges of the doors, rocker panels and trunk be kept clear and open.
  • Page 324 324 MAINTAINING YOUR VEHICLE Mopar Total Clean is specifically recommended for leather upholstery. Your leather upholstery can be best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth.

  • Page 325: Cleaning The Center Console Cup Holders

    Seat Belt Maintenance Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the belts need cleaning use Mopar Total Clean, a mild soap solution, or lukewarm water.

  • Page 326: Power Distribution Centers

    326 MAINTAINING YOUR VEHICLE Power Distribution Centers Front Power Distribution Center A power distribution center is located in the engine compartment. This center contains fuses and relays. Front Power Distribution Center CAUTION! • When installing the Power Distribution Center cover, it is important to ensure the cover is prop- erly positioned and fully latched.
  • Page 327 Front Power Distribution Center Fuses Cavity Fuse Circuits 20 Amp Left High Intensity Discharge Yellow Headlight - if equipped 20 Amp Right High Intensity Discharge Yellow Headlight - if equipped 15 Amp Adjustable Pedals - if Blue equipped 20 Amp AC Clutch/Horn Yellow 20 Amp...

  • Page 328: Rear Power Distribution Center

    328 MAINTAINING YOUR VEHICLE Cavity Fuse Circuits 40 Amp AC Clutch/Radiator Fan High Green — Low 50 Amp High Intensity Lighting - if equipped 60 Amp Radiator Fan - AWD Yellow 30 Amp Front Control Module (FCM) Pink 20 Amp Transmission - RLE Blue 30 Amp...
  • Page 329 Rear Power Distribution Center MAINTAINING YOUR VEHICLE 329 CAUTION! • When installing the Power Distribution Center cover, it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Power Distribu- tion Center, and possibly result in a electrical system failure.
  • Page 330 330 MAINTAINING YOUR VEHICLE Rear Power Distribution Center Fuses Cavity Fuse Circuits 60 Amp Ignition Off Draw (IOD) Yellow 40 Amp Battery Green — — 40 Amp Battery Green 30 Amp Heated Seats - if equipped Pink 20 Amp Fuel Pump Yellow —...
  • Page 331 Cavity Fuse Circuits 20 Amp Selectable Power Outlet Yellow 10 Amp Stop Lights — — — — — — — — — — — — — — 10 Amp Airbag/Occupant Classifica- tion Module 10 Amp Curtain Airbag - if equipped 5 Amp Antilock Brakes Module/ Orange...

  • Page 332: Vehicle Storage

    332 MAINTAINING YOUR VEHICLE Cavity Fuse Circuits 15 Amp Transmission - NAG1 Blue 5 Amp Analog Clock/Cargo Light/ Orange Overhead Console - if equipped 10 Amp Heated Mirrors - if equipped 5 Amp Heated Seats - if equipped/ Orange Inside Rearview Mirror/ Manual Temperature Control (early build) - if equipped 10 Amp...

  • Page 333: Replacement Light Bulbs

    REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Rear Courtesy/Reading Lights....W5W Rear Compartment (Trunk) Light ... . . 579 Overhead Console Reading Lights.

  • Page 334: Light Bulbs

    334 MAINTAINING YOUR VEHICLE LIGHT BULBS — Exterior (300C Models) Low Beam Headlight (Standard Halogen)..9006XS Low Beam Headlight – High Intensity Discharge (HID) ....D1S (Serviced at Dealer) High Beam Headlight.
  • Page 335 MAINTAINING YOUR VEHICLE 335...

  • Page 336: Low Beam Headlight, High Beam Headlight, And Park/Turn Light - 300C

    336 MAINTAINING YOUR VEHICLE CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. Low Beam Headlight, High Beam Headlight, and Park/Turn Light –...
  • Page 337 NOTE: On vehicles equipped with High Intensity Dis- charge Headlights (HID), when the headlights are turned on there is a blue hue to the lights. This diminishes and becomes more white after approximately 10 seconds, as the system charges. • Open the hood. •...

  • Page 338: Backup Light, Side Marker Light, And Tail/Stop Turn Light - 300 Models

    338 MAINTAINING YOUR VEHICLE CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. Backup Light, Side Marker Light, and Tail/Stop Turn Light —...
  • Page 339 3. Pull back the trunk liner. 4. Remove the remaining fastener from the back of the tail light assembly. 5. Push the electrical connector locking tab to the side. 6. Disconnect the electrical connector. MAINTAINING YOUR VEHICLE 339 7. Pull tail light assembly clear from vehicle to access bulbs.
  • Page 340 340 MAINTAINING YOUR VEHICLE 8. Pull the appropriate bulb to remove it from the socket. 9. Replace the bulb, reinstall the socket, and reattach the tail light assembly. 10. Close the trunk.

  • Page 341: Tail/Stop, Tail, Turn Signal Light, And Backup

    Tail/Stop, Tail, Turn Signal Light, and Backup Light — 300C Models 1. Open the Trunk. 2. Remove two fasteners from the back of the tail light assembly. MAINTAINING YOUR VEHICLE 341 3. Pull back the trunk liner. 4. Remove the remaining fastener from the back of the tail light assembly.
  • Page 342 342 MAINTAINING YOUR VEHICLE 7. Pull tail light assembly clear from vehicle to access bulbs. Turn bulb sockets counter-clockwise to remove.
  • Page 343 MAINTAINING YOUR VEHICLE 343 8. Pull the appropriate bulb to remove it from the socket. 9. Replace the bulb, reinstall the socket, and reattach the tail light assembly. 10. Close the trunk.

  • Page 344: License Light

    344 MAINTAINING YOUR VEHICLE License Light 1. Remove the screws securing the light to the rear fascia. 2. Remove the bulb and socket assembly and pull the bulb from the socket. 3. Replace the bulb and reinstall the bulb and socket assembly.
  • Page 345 Cooling System * 2.7 Liter Engines (Mopar 9.7 qts Antifreeze/Coolant 5 Year/ 100,000 Mile Formula) or equivalent. 3.5 Liter Engines (Mopar 10.6 qts Antifreeze/Coolant 5 Year/ 100,000 Mile Formula) or equivalent. 5.7 Liter Engines (Mopar 14.6 qts Antifreeze/Coolant 5 Year/ 100,000 Mile Formula) or equivalent.

  • Page 346: Fluids, Lubricants And Genuine Parts

    346 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Fluids, Lubricants and Genuine Parts Engine Coolant Mopar Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Ad- ditive Technology) Engine Oil (2.7 Liter) Use API Certified engine oil. SAE 5W-20 is recommended. Refer to the engine oil fill cap for the correct SAE grade meeting DaimlerChrysler Material Standard MS-6395.
  • Page 347 Chassis Component Automatic Transmission Brake Master Cylinder Front Axle Power Steering Reservoir Rear Axle Transfer Case Fluids, Lubricants and Genuine Parts Mopar ATF+4 Automatic Transmission Fluid or equivalent. Mopar DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable.
  • Page 349 MAINTENANCE SCHEDULES CONTENTS Emission Control System Maintenance ..350 Maintenance Schedules ....350 Schedule “B” ......353 Schedule “A”...

  • Page 350: Emission Control System Maintenance

    350 MAINTENANCE SCHEDULES EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued proper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
  • Page 351 • Extensive engine idling. • Driving in dusty conditions. • Short trips of less than 10 miles (16.2 km). • More than 50% of your driving is at sustained high speeds during hot weather, above 90°F (32°C). • Trailer towing. •...
  • Page 352 352 MAINTENANCE SCHEDULES At Each Stop for Fuel • Check the engine oil level about 5 minutes after a fully warmed engine is shut off. Checking the oil level while the vehicle is on level ground will improve the accu- racy of the oil level reading.

  • Page 353: Schedule "B

    SCHEDULE “B” Follow Schedule “B” if you usually operate your vehicle under one or more of the following conditions. Change the automatic transmission fluid and filter every 60,000 miles (100 000 km) if the vehicle is usually operated under one or more of the conditions marked with an •...
  • Page 354 354 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors.
  • Page 355 Miles (Kilometers) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Replace the spark plugs. 5.7L Engine. Inspect the front and rear brake linings and rotors.
  • Page 356 356 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors.
  • Page 357 Miles (Kilometers) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Replace the spark plugs. 5.7L Engine. Inspect the front and rear brake linings and rotors.
  • Page 358 358 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Replace the spark plugs. 5.7L Engine. Inspect the front and rear brake linings and rotors.
  • Page 359 Miles (Kilometers) Change engine oil and engine oil filter, if not re- placed at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Replace the engine timing belt.
  • Page 360 360 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter, if not re- placed at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Replace the spark plugs.

  • Page 361: Schedule "A

    SCHEDULE “A” Miles (Kilometers) [Months] Change engine oil and engine oil filter. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Replace the spark plugs. 5.7L Engine. Inspect the front and rear brake linings and rotors.
  • Page 362 362 SCHEDULE “A” Miles (Kilometers) [Months] Change engine oil and engine oil filter. Inspect the air cleaner filter and replace if required.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Replace the spark plugs. 5.7L Engine. Check and Inspect the accessory drive belt and tensioner.
  • Page 363 Miles (Kilometers) [Months] Change engine oil and engine oil filter. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Check and Inspect the accessory drive belt and ten- sioner.
  • Page 364 364 SCHEDULE “A” Miles (Kilometers) [Months] Change engine oil and engine oil filter. Inspect the air cleaner filter and replace if required.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Replace the spark plugs. 5.7L Engine. Check and replace, if necessary, the PCV valve.

  • Page 365: If You Need Consumer Assistance

    IF YOU NEED CONSUMER ASSISTANCE CONTENTS Suggestions For Obtaining Service For Your Vehicle ......366 Prepare For The Appointment .

  • Page 366: Suggestions For Obtaining Service For Your Vehicle

    We want you to be happy with our products and services. Warranty service must be done by an authorized Chrysler, Dodge, or Jeep dealer. We strongly recommend that you take your vehicle to your selling dealer. They know you and your vehicle best, and are most concerned that you get prompt and high quality service.
  • Page 367 • If for some reason you are still not satisfied, talk to the general manager or owner of the dealership. They want to know if you need assistance. • If your dealership is unable to resolve the concern, you may contact the Manufacturer’s Customer Center. Any communication to the Manufacturer’s Customer Center should include the following information: •...

  • Page 368: Warranty Information (U.s. Vehicles Only)

    368 IF YOU NEED CONSUMER ASSISTANCE Service Contract You may have purchased a service contract for your vehicle to help protect you from the high cost of unex- pected repairs after your manufacturer’s new vehicle limited warranty expires. The manufacturer stands be- hind only the manufacturer’s Service Contracts.

  • Page 369: Reporting Safety Defects

    REPORTING SAFETY DEFECTS In the 50 United States and Washington D.C.: If you believe that your vehicle has a defect which could cause a crash or cause injury or death, you should immediately inform the National Highway Traffic Safety Administra- tion (NHTSA) in addition to notifying the manufacturer.
  • Page 370 • Owner’s Manuals. These manuals have been prepared with the assistance of service and engineering specialists to acquaint you with specific Chrysler group vehicles. Included are starting, operating, emergency and maintenance pro- cedures as well as specifications, capabilities and safety tips.

  • Page 371: Department Of Transportation Uniform Tire Quality Grades

    DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories estab- lished by the National highway Traffic Safety Adminis- tration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your car.

  • Page 372: Temperature Grades

    372 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
  • Page 373 INDEX...
  • Page 374 374 INDEX ABS (Anti-Lock Brake System) ... . . 225 Adding Engine Coolant (Antifreeze) ..314 Adding Fuel ......257 Adding Washer Fluid .
  • Page 375 Ball Joints ......309 Battery ....... 306 Jump Starting .
  • Page 376 376 INDEX Compass Variance ..... . 155 Computer, Trip/Travel ....153 Console .
  • Page 377 Hazard Warning Flasher ....274 Jacking ......275 Jump Starting .
  • Page 378 378 INDEX Cooling System ..... . . 312 Engine Oil ..... . . 298,299 Power Steering .
  • Page 379 On With Wipers ....103,108 Passing ......106 Switch .
  • Page 380 380 INDEX Lap/Shoulder Belts ..... . 32 LATCH (Lower Anchors and Tether for CHildren) ..56 Latch Plate .
  • Page 381 Lower Anchors and Tether for CHildren (LATCH) ......56 Lubrication, Body ..... . . 309 Lumbar Support .
  • Page 382 382 INDEX Synthetic ......302 Viscosity ......301,344 Onboard Diagnostic System .
  • Page 383 Radio (Sound Systems) ....164,171 Rain Sensitive Wiper System ....107 Rear Park Assist System ....114 Rear Seat, Folding .
  • Page 384 384 INDEX Rear Folding ......94 Reclining ......91 Security Alarm (Theft Alarm) .
  • Page 385 Temperature Gauge, Engine Coolant ..146,275 Theft Alarm (Security Alarm) ....25 Theft System (Security Alarm) ....25 Tie Down Hooks, Cargo .
  • Page 386 386 INDEX Trailer Towing ......262 Cooling System Tips ....272 Hitches .
  • Page 387 INDEX 387 Wheel and Wheel Trim ....323 Wheel Bearings ......321 Wind Buffeting .
  • Page 388 NOTES...
  • Page 389 NOTES...
  • Page 390 NOTES...
  • Page 391 NOTES...
  • Page 392 NOTES...

Table of Contents

Save PDF