Configure Vlan Membership - NETGEAR MS510TX User Manual

Note: You cannot delete VLAN 1, which is the default VLAN.
7. Click the Delete button.
The VLAN is removed.
Reset All VLANs to the Default Settings

To reset all VLANs to the default settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching> VLAN > Advanced > VLAN Configuration.
The VLAN Configuration page displays.
6. Select the Reset Configuration check box.
7. Click the Apply button.
Your settings are saved.
The default values are as follows:
• All ports are assigned to default VLAN 1.
• All ports are configured with PVID 1.
All VLANs, except for the default VLAN, are deleted.

Configure VLAN Membership


To configure VLAN membership:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Switching
Access the Switch
97
on page 12.