NETGEAR MS510TX User Manual page 21

Smart Managed Pro Switches MS510TX and MS510TXPP
Table 3. LEDs on the Device View page (continued)
LED
2.5G Ports 5 and 6, Right LEDs
PoE status
(Model MS510TXPP only)
5G Ports 7 and 8, Left LEDs
Link, speed, and activity
5G Ports 7 and 8, Right LEDs
PoE status
(Model MS510TXPP only)
10G Port 9, LED
Link, speed, and activity
SFP+ Port 10, LEDs
Link, speed, and activity
6. To see a menu that displays statistics and configuration options, right-click a port.
Description
The right LEDs for ports 5 and 6 (mg5 and mg6) indicate the following
status:
• Off. The port is not delivering PoE.
• Solid green. The port is delivering PoE.
• Solid yellow. A PoE fault occurred.
The left LEDs for ports 7 and 8 (mg7 and mg8) indicate the following
status:
• Off. No link is established.
• Solid green. A valid 2.5 Gbps or 5 Gbps link is established.
• Blinking green. The port is transmitting or receiving packets at 2.5
Gbps or 5 Gbps.
• Solid yellow. A valid 100 Mbps or 1000 Mbps link is established.
• Blinking yellow. The port is transmitting or receiving packets at 100
Mbps or 1000 Mbps.
The right LEDs for ports 7 and 8 (mg7 and mg8) indicate the following
status:
• Off. The port is not delivering PoE.
• Solid green. The port is delivering PoE.
• Solid yellow. A PoE fault occurred.
The LED for port 9 (xmg9) indicates the following status:
• Off. No link is established.
• Solid green. A valid 10 Gbps link is established.
• Blinking green. The port is transmitting or receiving packets at
10 Gbps.
• Solid yellow. A valid 5 Gbps, 2.5 Gbps, 1000 Mbps, or 100 Mbps
link is established.
• Blinking yellow. The port is transmitting or receiving packets at
5 Gbps, 2.5 Gbps, 1000 Mbps, or 100 Mbps
The LEDs for port 10 (xg10, the SFP+ port) indicate the following status:
• Off. No SFP+ module link is established on the fiber port.
• Left LED solid green. The fiber port established a valid 10 Gbps
link.
• Left LED blinking green. The fiber port is transmitting or receiving
packets at 10 Gbps.
• Right LED solid yellow. The fiber port established a valid 1 Gbps
link.
• Right LED blinking yellow. The fiber port is transmitting or receiving
packets at 1 Gbps
Get Started
21