Configure An Ipv6 Diffserv Ipv6 Classes - NETGEAR MS510TX User Manual

6. Click the class name, which is a hyperlink.
The page on which you can change the class configuration displays.
7. Change the class configuration as needed.
8. Click the Apply button.
Your settings are saved.
Delete an IPv4 DiffServ Class

To delete an IPv4 DiffServ class:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select QoS > DiffServ > Advanced > Class Configuration.
The Class Configuration page displays.
6. Select the check box for the class name.
7. Click the Delete button.
The class is removed.

Configure an IPv6 DiffServ IPv6 Classes

The IPv6 class configuration feature extends the existing QoS ACL and DiffServ functionality
by providing support for IPv6 packet classification. An Ethernet IPv6 packet is distinguished
from an IPv4 packet by its unique Ethertype value, so all IPv6 classifiers include the
Ethertype field. An IPv6 access list serves the same purpose as its IPv4 counterpart.
The destination and source IPv6 addresses use a prefix length value instead of an individual
mask to qualify them as a subnet addresses or a host addresses. The flow label is a 20-bit
number that is unique to an IPv6 packet, used by end stations to signify some form of Quality
of Service (QoS) handling in routers.
Packets that match an IPv6 classifier are allowed to be marked using only the 802.1p (CoS)
field or the IP DSCP field in the Traffic Class octet. IP precedence is not defined for IPv6.
This is not an appropriate type of packet marking.
Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Quality of Service
Access the Switch
203
on page 12.