NETGEAR MS510TX User Manual page 261

Smart Managed Pro Switches MS510TX and MS510TXPP
7. In the Rule ID field, enter a whole number in the range of 1 to 50 that is used to identify the
rule.
8. From the Action menu, select Permit or Deny to specify the action that must be taken if a
packet matches the rule's criteria.
9. From the Match Every menu, select one of the following options:
• False. Signifies that packets do not need to match the selected ACL and rule. With
this selection, you can add a destination MAC address, destination MAC mask, and
VLAN.
• True. Signifies that all packets must match the selected ACL and rule and are either
permitted or denied. In this case, since all packets match the rule, the option of
configuring other match criteria is not offered.
10. Specify the additional match criteria for the selected ACL type.
The rule match criteria fields available for configuration depend on the selected ACL type.
For information about the possible match criteria fields, see the following table.
ACL Based On
Destination MAC
Source MAC
Destination IPv4
Source IPv4
Destination IPv6
Source IPv6
Destination IPv4 L4 Port
Source IPv4 L4 Port
Fields
• Destination MAC. Specify the destination MAC address to compare against
an Ethernet frame. The valid format is xx:xx:xx:xx:xx:xx. The BPDU keyword
might be specified using a destination MAC address of 01:80:C2:xx:xx:xx.
• Destination MAC Mask. Specify the destination MAC address mask, which
represents the bits in the destination MAC address to compare against an
Ethernet frame. The valid format is xx:xx:xx:xx:xx:xx. The BPDU keyword
might be specified using a destination MAC mask of 00:00:00:ff:ff:ff.
• Source MAC. Specify the source MAC address to compare against an
Ethernet frame. The valid format is xx:xx:xx:xx:xx:xx.
• Source MAC Mask. Specify the source MAC address mask, which
represents the bits in the source MAC address to compare against an
Ethernet frame. The valid format is (xx:xx:xx:xx:xx:xx).
• Destination IP Address. Specify the destination IP address.
• Destination IP Mask. Specify the destination IP address mask.
• Source IP Address. Specify the source IP address.
• Source IP Mask. Specify the source IP address mask.
• Destination Prefix. Specify the destination prefix.
• Destination Prefix Length. Specify the destination prefix length.
• Source Prefix. Specify the source destination prefix.
• Source Prefix Length. Specify the source prefix length.
• Destination L4 port (protocol). Specify the destination IPv4 L4 port
protocol.
• Destination L4 port (value). Specify the destination IPv4 L4 port value.
• Source L4 port (protocol). Specify the source IPv4 L4 port protocol.
• Source L4 port (value). Specify the source IPv4 L4 port value.
Manage Device Security
261