NETGEAR MS510TX User Manual page 262

ACL Based On
Destination IPv6 L4 Port
Source IPv6 L4 Port
11. In the Binding Configuration section, from the Direction menu, select the packet filtering
direction for the ACL.
Only the inbound direction is valid.
12. In the Ports and LAG tables in the Binding Configuration section, click each port and LAG to
which the ACL must be applied.
Selected ports and LAGs are marked with a check mark.
13. Click the Add button.
The rule is added to the ACL.
Modify an ACL Rule

To modify an ACL rule:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > ACL > ACL Wizard.
The ACL Wizard page displays.
6. Select check box for the rule.
7. Update the match criteria as needed.
8. Click the Apply button.
Your settings are saved.
Smart Managed Pro Switches MS510TX and MS510TXPP
Fields
• Destination L4 port (protocol). Specify the destination IPv6 L4 port
protocol.
• Destination L4 port (value). Specify the destination IPv6 L4 port value.
• Source L4 port (protocol). Specify the source IPv6 L4 port protocol.
• Source L4 port (value). Specify the source IPv6 L4 port value.
Manage Device Security
Access the Switch
262
on page 12.