NETGEAR MS510TX User Manual page 160

Smart Managed Pro Switches MS510TX and MS510TXPP
Table 45. IP Statistics information (continued)
Field
IpReasmOKs
IpReasmFails
IpFragOKs
IpFragFails
IpFragCreates
IpRoutingDiscards
IcmpInMsgs
IcmpInErrors
IcmpInDestUnreachs
IcmpInTimeExcds
IcmpInParmProbs
IcmpInSrcQuenchs
IcmpInRedirects
IcmpInEchos
IcmpInEchoReps
IcmpInTimestamps
IcmpInTimestampReps
IcmpInAddrMasks
IcmpInAddrMaskReps
IcmpOutMsgs
IcmpOutErrors
Description
The number of IP datagrams successfully reassembled.
The number of failures detected by the IP reassembly algorithm (for
whatever reason: timed out, errors, and so on). This is not necessarily a
count of discarded IP fragments since some algorithms can lose track of the
number of fragments by combining them as they are received.
The number of IP datagrams that were fragmented at this entity.
The number of IP datagrams that were discarded because they needed to
be fragmented at this entity but could not be, for reasons such as their Don't
Fragment flag was set.
The number of IP datagram fragments that were generated as a result of
fragmentation at this entity.
The number of routing entries that were discarded even though they were
valid. One possible reason for discarding such an entry could be to free up
buffer space for other routing entries.
The total number of ICMP messages that the entity received. This counter
includes all those counted by icmpInErrors.
The number of ICMP messages that the entity received but determined as
having ICMP-specific errors (bad ICMP checksums, bad length, and so on).
The number of ICMP destination unreachable messages received.
The number of ICMP time exceeded messages received.
The number of ICMP parameter problem messages received.
The number of ICMP source quench messages received.
The number of ICMP redirect messages received.
The number of ICMP echo (request) messages received.
The number of ICMP echo reply messages received.
The number of ICMP timestamp (request) messages received.
The number of ICMP timestamp reply messages received.
The number of ICMP address mask request messages received.
The number of ICMP address mask reply messages received.
The total number of ICMP messages that this entity attempted to send. This
counter includes all those counted by icmpOutErrors.
The number of ICMP messages that this entity did not send due to
problems discovered within ICMP such as a lack of buffers. This value does
not include errors discovered outside the ICMP layer such as the inability of
IP to route the resultant datagram. In some implementations there might be
no types of error that contribute to this counter's value.
Configure Routing
160