NETGEAR MS510TX User Manual page 253

• Configure a Private VLAN Host Interface
• Configure a Private VLAN Promiscuous Interface
Configure the Private VLAN Type

To configure a private VLAN type:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Traffic Control > Private Vlan > Private Vlan Type Configuration.
The Private Vlan Type Configuration page displays.
6. Select the check box for the VLAN ID that you want to configure.
7. From the Private VLAN Type menu, select the type of private VLAN. Possible values are as
follows:
• Unconfigured. Sets the private VLAN type as unconfigured. This is the default
selection.
• Primary. Sets the private VLAN type as primary, which allows Layer 2 connectivity
from promiscuous ports to isolated ports and to community ports.
• Isolated. Sets the private VLAN type as isolated, which allows isolated ports to send
traffic to the primary VLAN and to promiscuous ports.
• Community. Sets the private VLAN type as community, which allows Layer 2
connectivity from community ports to promiscuous ports and to community ports of
the same community.
8. Click the Apply button.
Your settings are saved.
Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security
on page 256
on page 257
Access the Switch
253
on page 12.