View Or Delete Ip Acl Bindings In The Ip Acl Binding Table - NETGEAR MS510TX User Manual

8. To add the selected ACL to a port or LAG, in the Ports table or LAG table, click the port or
LAG so that a check mark displays.
You can add the ACL to several ports and LAGs.
The Ports and LAG tables display the available and valid interfaces for ACL bindings. All
nonrouting physical interfaces and interfaces participating in LAGs are listed.
9. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information displayed on the page.
Table 64. Interface Binding Status table information
Field
Interface
Direction
ACL Type
ACL ID
Sequence Number

View or Delete IP ACL Bindings in the IP ACL Binding Table

Use the IP Binding Table page to view or delete the IP ACL bindings.

To view or delete IP ACL bindings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > ACL > Advanced > Binding Table.
The IP Binding Table page displays.
Smart Managed Pro Switches MS510TX and MS510TXPP
Description
The selected interface.
The selected packet filtering direction for the ACL.
The type of ACL assigned to the selected interface and direction.
The ACL number (for an IP ACL) or ACL name (for a named IPv6 ACL) identifying the
ACL assigned to the selected interface and direction.
The sequence number signifying the order of specified ACL relative to other ACLs
assigned to the selected interface and direction.
Manage Device Security
Access the Switch
288
on page 12.