Configure Mld Snooping Querier Vlan Settings - NETGEAR MS510TX User Manual

• Querier Expiry Interval (secs). This is a field with a calculated value that shows the
interval in seconds after which the last querier information is removed. The interval is
calculated as 2 * Query Interval + 5. The default value is 255.
7. Click the Apply button.
Your settings are saved.
The VLAN IDs Enabled for MLD Snooping Querier section displays the IDs of the VLANs
for which MLD snooping querier is enabled (see
Settings on page 146).

Configure MLD Snooping Querier VLAN Settings


To configure MLD snooping querier VLAN settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching> Multicast > MLD Snooping > Querier VLAN Configuration.
The MLD Snooping Querier VLAN Configuration page displays.
6. In the VLAN ID field, specify the VLAN ID on which the MLD snooping querier is
administratively enabled.
7. From the Querier Election Participate Mode menu, select to enable or disable the querier
participation election mode for MLD snooping.
When this mode is disabled, on detecting another querier of same version in the VLAN,
the snooping querier moves to a non-querier state. When this mode is enabled, the
snooping querier participates in querier election where the lowest IP address wins the
querier election and operates as the querier in that VLAN. The other querier moves to
non-querier state.
8. In the Querier VLAN Address field, specify the snooping querier address to be used as the
source address in periodic MLD queries sent on the specified VLAN.
9. Click the Apply button.
Your settings are saved.
Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Switching
Configure MLD Snooping Querier VLAN
Access the Switch
146
on page 12.