NETGEAR MS510TX User Manual page 296

Smart Managed Pro Switches MS510TX and MS510TXPP
Table 68. Detailed port statistics (continued)
Field
STP Mode
STP State
Admin Mode
LACP Mode
Physical Mode
Physical Status
Link Status
Link Trap
Octets Received
Packets Received 64 Octets
Packets Received 65-127
Octets
Packets Received 128-255
Octets
Packets Received 256-511
Octets
Packets Received 512-1023
Octets
Description
The Spanning Tree Protocol administrative mode associated with the port or
port channel. The possible values are as follows:
• Enabled. Spanning Tree Protocol is enabled for this port.
• Disabled. Spanning Tree Protocol is disabled for this port.
The port's current Spanning Tree state. This state controls what action a port
takes on receipt of a frame. If the bridge detects a malfunctioning port, it places
that port into the broken state. The states are defined in IEEE 802.1D:
• Disabled
• Blocking
• Listening
• Learning
• Forwarding
• Broken
The port control administration state (Up or Down). The port must be enabled for
it to be allowed into the network. The default is Up.
Indicates the Link Aggregation Control Protocol administrative state. The mode
must be enabled for the port to participate in link aggregation.
Indicates the port speed and duplex mode. In autonegotiation mode the duplex
mode and speed are set from the autonegotiation process.
Indicates the port speed and duplex mode.
Indicates whether the link is up or down.
Indicates whether or not the port sends a trap when link status changes.
The total number of octets of data (including those in bad packets) received on
the network (excluding framing bits but including FCS octets). This object can be
used as a reasonable estimate of Ethernet utilization.
The total number of packets (including bad packets) received that were 64
octets in length (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between
65 and 127 octets in length inclusive (excluding framing bits but including FCS
octets).
The total number of packets (including bad packets) received that were between
128 and 255 octets in length inclusive (excluding framing bits but including FCS
octets).
The total number of packets (including bad packets) received that were between
256 and 511 octets in length inclusive (excluding framing bits but including FCS
octets).
The total number of packets (including bad packets) received that were between
512 and 1023 octets in length inclusive (excluding framing bits but including
FCS octets).
Monitor the System
296