NETGEAR MS510TX User Manual page 49

If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > Management > Green Ethernet >
The Green Ethernet Details page displays.
6. Scroll down to the Remote Device Information section.
7. Form the Interface menu, select the interface.
The following table describes the nonconfigurable fields.
Table 13. Green Ethernet Remote Device Information
Field
Remote ID
Remote Tw_sys_tx (uSec)
Remote Tw_sys_tx Echo (uSec)
Remote Tw_sys_rx (uSec)
Remote Tw_sys_rx Echo (uSec)
View the Green Ethernet Statistics Summary
This page summarizes the green Ethernet settings currently in use.

To view the green Ethernet statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > Management > Green Ethernet > Green Ethernet Summary.
Smart Managed Pro Switches MS510TX and MS510TXPP
Description
The remote client identifier assigned to the remote system.
The value of Tw_sys that the remote system can support.
The value of Transmit Tw_sys echoed back by the remote system.
The value of Tw_sys that the remote system requests from the local
system.
The value of Receive Tw_sys echoed back by the remote system.
Configure System Information
Access the Switch

Green Ethernet Details.
Access the Switch
49
on page 12.
on page 12.