NETGEAR MS510TX User Manual page 74

Smart Managed Pro Switches MS510TX and MS510TXPP
Field
Managed Addresses
Address SubType
Address
Interface SubType
Interface Number
MAC/PHY Details
Auto-Negotiation Supported Specifies whether the remote device supports port-speed autonegotiation.
Auto-Negotiation Enabled
Auto Negotiation Advertised
Capabilities
Operational MAU Type
MED Details
Capabilities Supported
Current Capabilities
Device Class
PoE Device Type
PoE Power Source
PoE Power Priority
PoE Power Value
Hardware Revision
Firmware Revision
Software Revision
Serial Number
Description
The type of the management address.
The advertised management address of the remote system.
The port subtype.
The port on the remote device that sent the information.
The possible values are True or False.
The port speed autonegotiation support status. The possible values are True
and False.
The port speed autonegotiation capabilities.
The Medium Attachment Unit (MAU) type. The MAU performs physical layer
functions, including digital data conversion from the Ethernet interface
collision detection and bit injection into the network.
The supported capabilities that were received in MED TLV from the device.
The advertised capabilities that were received in MED TLV from the device.
The LLDP-MED endpoint device class. The possible device classes are as
follows:
• Endpoint Class 1 Indicates a generic endpoint class, offering basic LLDP
services.
• Endpoint Class 2 Indicates a media endpoint class, offering media
streaming capabilities as well as all Class 1 features.
• Endpoint Class 3 Indicates a communications device class, offering all
Class 1 and Class 2 features plus location, 911, Layer 2 switch support,
and device information management capabilities.
The type of PoE for the port, for example, powered.
The power source for the port.
The power priority for the port.
The power value for the port.
The hardware version advertised by the remote device.
The firmware version advertised by the remote device.
The software version advertised by the remote device.
The serial number advertised by the remote device.
Configure System Information
74