Configure Management Access - NETGEAR MS510TX User Manual

option as the first method, no other method is tried, even if you specified more than
one method.
• RADIUS. The user's ID and password are authenticated using the RADIUS server. If
you select Radius or Tacacs as the first method and an error occurs during the
authentication, the switch uses method 2 to authenticate the user.
• TACACS+. The user's ID and password are authenticated using the TACACS+
server. If you select Radius or Tacacs as the first method and an error occurs during
the authentication, the switch attempts user authentication method 2.
• None. The authentication method is unspecified. If you select this option as the first
method, no other method is tried, even if you specified more than one method.
8. From the menu in the 2 column, select the authentication method, if any, that must be used
second in the selected authentication login list.
This is the method that is used if the first method times out. If you select a method that
does not time out as the second method, the third method is not tried.
9. From the menu in the 3 column, select the authentication method, if any, that must be used
third in the selected authentication login list.
10. From the menu in the 4 column, select the method, if any, that must be used fourth in the
selected authentication login list.
This is the method that is used if all previous methods time out.
11. Click the Apply button.
Your settings are saved.

Configure Management Access

You can configure HTTP and secure HTTP access to the switch management interface. You
can also configure access control profiles and access rules.
From the Security > Management Security > Access menu, you can access the pages that
are described in the following sections:
• Configure HTTP Settings
• Configure HTTPS Settings
• Manage the Certificate
• Configure Access Control
Smart Managed Pro Switches MS510TX and MS510TXPP
on page 231
on page 231
on page 233
on page 235
Manage Device Security
230