NETGEAR MS510TX User Manual page 293

Smart Managed Pro Switches MS510TX and MS510TXPP
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Monitoring > Ports > Port Statistics.
6. Select which type of interfaces display onscreen:
• To display physical ports only, click the PORTS link.
• To display LAGs only, click the LAGS link.
• To display both physical ports and LAGs, click the All link.
7. To view information about a single interface, type the interface number in the Go To
Interface field, and click the Go button.
8. Click the Refresh button to refresh the page with the latest information about the switch.
The following table describes the per-port statistics displayed on the page.
Table 67. Port Status information
Field
Interface
Total Packets Received
Without Errors
Packets Received With Errors
Broadcast Packets Received
Packets Transmitted Without
Errors
Description
This object indicates the interface of the interface table entry associated with
this port on an adapter.
The total number of packets received that were without errors.
The number of inbound packets that contained errors preventing them from
being deliverable to a higher-layer protocol.
The total number of good packets received that were directed to the broadcast
address. This does not include multicast packets.
The number of frames that were transmitted by this port to its segment.
Monitor the System
293