Hardware Specifications - NETGEAR MS510TX User Manual

Hardware Specifications

Table 74. Hardware specifications
Feature
Interfaces
Flash memory size
SDRAM size and type
Switching capacity
Forwarding method
Packet forwarding rate
MAC addresses
Green Ethernet
Supported protocols and standards
Smart Managed Pro Switches MS510TX and MS510TXPP
Description
Nine Ethernet RJ-45 ports and one fiber SFP+ ports:
• Ports g1–g4. 1 Gbps Ethernet ports
• Ports mg5–mg6. 2.5 Gbps Multi-Gigabit Ethernet ports
• Ports mg7–mg8. 5 Gbps Multi-Gigabit Ethernet ports
• Port xmg9. 10 Gbps Multi-Gigabit Ethernet port
• Port xg10. Fiber port (SFP+)
256 MB NAND
512 MB DDR3 SDRAM
Non blocking full wire speed on all packet sizes
Store and forward
• 1G. 1,488,000 pps
• 2.5G. 3,720,000 pps
• 5G. 7,440,000 pps
• 10G. 14,880,000 pps
16 K
• Automatic power-down mode on a port when the link is down
• Short cable mode
• EEE mode
• TCP/IP
• UDP
• HTTP
• ICMP
• TFTP
• DHCP
• IEEE 802.1D
• IEEE 802.1 p
• IEEE 802.1Q
• IEEE802.3 1000BASE-T and 10GBASE-T
• IEEE802.3az (EEE)
• IEEE 802.3bz NBASE-T and MGBASE-T
• IEEE 802.1af (PoE)
• IEEE 802.1at (PoE+)
• IEEE 802.3ad Link aggregation (LAG with LACP)
• IEEE 802.1ab LLDP
• IEEE 802.1x RADIUS network access control
Hardware Specifications and Default Settings
348