Vlan Membership Configuration - NETGEAR GS752TP Software Administration Manual

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

VLAN Membership Configuration

Use this screen to configure VLAN port membership for a particular VLAN. You can select
the Group Operation through this screen.
To configure VLAN membership:

1. Select Switching
The following screen displays:
2. From the VLAN ID list, select the VLAN to which you want to add ports.
3. Click the orange bar below the VLAN Type field to display the physical ports on the switch.
4. Click the lower orange bar to display the LAGs on the switch.
5. To select the ports or LAGs to add to the VLAN, click the square below each port or LAG.
You can add each interface as a tagged (T) or untagged (U) VLAN member. A blank
square means that the port is not a member of the VLAN.
• Tagged. Frames transmitted from this port are tagged with the port VLAN ID.
• Untagged. Frames transmitted from this port are untagged. Each port can be an
untagged member of only one VLAN. By default, all ports are untagged members of
VLAN 1.
VLAN Advanced
  
Configuring Switching Information
84
VLAN Membership.