NETGEAR MS510TX User Manual page 251

Smart Managed Pro Switches MS510TX and MS510TXPP
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Traffic Control > Port Security > Port Security Configuration.
The Port Security Configuration page displays.
6. Make sure that port security is globally enabled.
For more information, see
7. Select Security > Traffic Control > Port Security > Interface Configuration.
The Interface Configuration page displays.
8. Make sure that port security is enabled for the individual interface for which you want to view
the dynamically learned MAC addresses.
For more information, see
9. Select Security > Traffic Control > Port Security > Security MAC Address.
The Port Settings page displays. The page also displays the Dynamic MAC Address
Table section.
10. From the Port List menu, select an interface.
The Number of Dynamic MAC Addresses Learned field displays the number of
dynamically learned MAC addresses for the interface.
The Dynamic MAC Address Table displays the MAC addresses and their associated
VLANs that were learned on the selected interface.
Field
VLAN ID
MAC Address
11. To convert the dynamically learned MAC addresses to a statically locked addresses, select
the Convert Dynamic Address to Static check box.
12. Click the Apply button.
The dynamic MAC addresses are converted to static MAC addresses in a numerically
ascending order until the static limit is reached.
13. To refresh the page with the latest information about the switch, click the Refresh button.
Configure 802.1X Settings for a Port
Configure a Port Security Interface
Description
The VLAN ID corresponding to the MAC address.
The MAC addresses learned on the interface.
Manage Device Security
251
Access the Switch on page 12.
on page 243.
on page 249.