Configure Green Ethernet Settings - NETGEAR MS510TX User Manual

6. Select the check box for the entry to update.
7. Enter the new information in the appropriate field.
8. Click the Apply button.
Your settings are saved.
9. To clear all the dynamic host name entries from the list, click the Clear button.
The Dynamic Host Mapping table shows host name-to-IP address entries that the switch
learned. The following table describes the dynamic host fields.
Table 11. Dynamic Host Mapping information
Field
Host
Type
IPv4/IPv6 Address

Configure Green Ethernet Settings

Use this page to globally configure Green Ethernet features. Using the Green Ethernet
Configuration features allows for power consumption savings.

To configure the Green Ethernet settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > Management > Green Ethernet > Green Ethernet Configuration.
The Green Ethernet Configuration page displays.
Auto Power Down mode is enabled globally, but you can disable it on a per-port basis for
ports g1–g4 (see
disable it for other ports. If Auto Power Down mode is enabled on a port and the port link
goes down, the physical layer (PHY) automatically shuts down for a short period and
wakes up to check link pulses. This mode reduces power consumption on a port if no link
partner is present.
Smart Managed Pro Switches MS510TX and MS510TXPP
Description
The host name that you assign to the specified IP address.
The type of the dynamic entry.
The IP address associated with the host name.
Manage and View the PoE Port Configuration
Configure System Information
Access the Switch
45
on page 12.
on page 55). You cannot