Appendix A Hardware Specifications And Default Values; Fs728Tp Smart Switch Specifications - NETGEAR FS728TPv2 Software Administration Manual

Hardware Specifications and Default
A.
Values

FS728TP Smart Switch Specifications

The FS728TP Smart Switch conforms to the TCP/IP, UDP, HTTP, ICMP, TFTP, DHCP, IEEE
802.1D, IEEE 802.1p, and IEEE 802.1Q standards.
Feature
Interfaces
PoE
Flash memory size
SRAM size and type
Feature
Switching capacity
Forwarding method
Packet forwarding rate
MAC addresses
Green Ethernet
Value
24 10/100 Ethernet ports
Two 10/100/1000M Gigabit Ethernet (RJ-45) ports
Two 1000M Gigabit Ethernet combo ports
RJ-45 supports auto sensing for 10/100/1000M speed on RJ45
and 1000M on SFP1000M SFP Gigabit Ethernet ports
Ports 1–24, IEEE 802.3af, Alternative A (MDI-X)
16 MB
64 MB DDR
Value
Non-Blocking Full WireSpeed on all packet sizes
Store and Forward
10M:14,880 pps/
100M:148,810 pps/
1G:1,488,000 pps
4K
Automatic power down on port when link is down
Appendix A: Hardware Specifications and Default Values
A
| 232