Brocade Communications Systems FastIron FGS624P Hardware Installation Manual page 73

Connecting Network Devices and Checking Connectivity
Troubleshooting network connections
You can configure your Foundry device to monitor optical transceivers in the system, either globally or by specified port. When this
feature is enabled, the system monitors the temperature and signal power levels for the optical transceivers in the specified ports.
Console messages and syslog messages are sent when optical operating conditions fall below or rise above the XFP or SFP
manufacturer's recommended thresholds. For more information about digital optical monitoring, refer to the <Italic>FastIron Configuration
Guide.
Brocade FastIron GS and GS-STK Hardware Installation Guide 73
Part Number: 53-1002186-03