Brocade Communications Systems FastIron FGS624P Hardware Installation Manual page 24

Product Overview
Hardware features
•
The 100/1000 fiber ports (1F – 4F) use the LEDs located beneath the fiber connectors. These are combined Link or Activity
(Lnk or Act) LEDs.
•
The POE ports (1 – 24) use the round LEDs located beneath the copper ports. The first (left-most) LED is for port 1, the second
LED is for port 2, the third LED is for port 3, and so forth.
•
The 10 Gbps fiber ports use the LEDs located beside them.
•
FGS-STK devices use the Stack LEDs (1 – 8) located to the right of the console port.
•
Power supplies use the Pwr, PS1, and PS2 LEDs on the left side of the front panel, under the console port.
TABLE 4 LEDs
LED Position
10/100/1000 Copper Port LEDs
Lnk or Act Located along the top
of the copper ports
Left for upper copper
connector
Right for lower copper
connector
100/1000 Fiber Port LEDs
Lnk or Act Bottom left
10 Gbps Port LEDs
Lnk Located beside the 10
Gbps port.
This is the top-most
LED.
Act Located beside the 10
Gbps port.
This is the
bottom-most LED.
POE Port LEDs
POE Located along the
bottom of the copper
ports
Left for upper port
Right for lower port
Power Supply LEDs
Power Right-most LED
beneath the console
port
24
State Meaning
On The link is up.
Off The link is down.
Blinking The port is transmitting or receiving traffic
On The link is up.
Off The link is down.
Blinking The port is transmitting or receiving traffic.
On The port is connected.
Off No fiber port connection exists or the link is down.
On or Traffic is being transmitted or received on the fiber
Blinking port.
Off No traffic is being transmitted or received on the
fiber port.
On (Green) The port is enabled, a power-consuming device
has been detected, and the module is supplying
power to the device.
Off The port is not providing in-line power.
On The device is powered on and has enough power
to operate.
Off The device is not powered on, or has been
powered on but does not have sufficient power to
operate.
Brocade FastIron GS and GS-STK Hardware Installation Guide
Part Number: 53-1002186-03