Brocade Communications Systems FastIron FGS624P Hardware Installation Manual page 20

Product Overview
Hardware features
TABLE 3 Network Interfaces
Interface
1000Base-BX-D
1000Base-BX-U
1000Base-LHA
1000Base-LHB
1000Base-LX
1000Base-SX
1000Base-SX2
1000Base-T
100Base-BX
100Base-FX
10GBase-ER
10GBase-LR
10GBase-SR
10GBase-ZR
10GBase-ZRD
CX4 10GbE module
10GbE XFP and CX4 module
1310-MMF 10GbE
Viewing the media types installed in the ports
The show media command displays the types of media (copper or fiber) installed in the ports. The following example is show media
output:
FastIron(config)#show media
0/1/1:M-SX 0/1/2: C 0/1/3: C 0/1/4: C 0/1/5: C 0/1/6: C 0/1/7: C 0/1/8: C 0/1/9:
C 0/1/10: C 0/1/11: C 0/1/12: C 0/1/13: C 0/1/14: C 0/1/15: C 0/1/16: C 0/1/17:
C 0/1/18: C 0/1/19: C 0/1/20: C 0/1/21: C 0/1/22: C 0/1/23: C 0/1/24: C
0/2/1:XG-LMR 0/2/2:1310-NM
The "Show Media Description"
10/100/1000 Mbps ports
10/100/1000 copper ports use auto-sensing and auto-negotiating to determine the speed (10 Mbps, 100 Mbps, or 1000 Mbps) and
mode (full-duplex or half-duplex) of the port at the other end of the link, and adjust port speed accordingly.
10/100/1000 ports on FGS devices support RJ-45 copper connectors. The output of the show media command displays C next to the
ports that have copper connectors installed.
Gigabit copper ports on the FGS and FGS-STK models support auto MDI or MDIX detection. For more information about this feature,
refer to "Configuring MDI or MDIX" in the <Italic>FastIron Configuration Guide.
100/1000 Mbps ports
100/1000 fiber ports (ports 1F – 4F) on FGS and FGS-STK devices support the SFP fiber connectors listed in
20
Show Media Description
M-GBXD
M-GBXU
M-LHA
M-LHB
M-LX
M-SX
M-SX2
C
M-FBX
M-FX
XG-ER
XG-LR
XG-SR
XG-ZR
XG-ZRD
CX4
CX4
1310-NM
column in Table 3 shows the text that is displayed by the show media command for each connector type.
Brocade FastIron GS and GS-STK Hardware Installation Guide
Table 3.
Part Number: 53-1002186-03