Brake Fluid Level Inspection - KYMCO AGILITY300 Manual

Brake fluid
Brake fluid level
inspection
With the scooter in an upright position, check
the front and rear fluid level.
Change the brake fluid at the time specified in
the maintenance schedule.
The fluid level should be above the lower level
. If the fluid level is below the lower level
line 1
mark "L", check over the worn brake pad or
leakage.
NOTE:
Make sure there is no fluid leaking.
Check for fluid deterioration or crack on the
brake hoses and fittings.
Brake fluid type: DOT- 4
MAINTENANCE
Use only DOT-4 brake fluid from a sealed
container. Clean the filler cap before
removing.
L
WARNING
1
49