Brake Fluid Level Inspection - KYMCO Dink-R125 Manual

Table of Contents

Advertisement

Brake fluid

Brake fluid level inspection

With the scooter in an upright position, check
the front and rear fluid level.
Change the brake fluid at the time specified in
the maintenance schedule.
The fluid level should be above the lower level
line. If the fluid level is below the lower level
mark "L", check over the worn brake pad or
leakage.
Upper
Lower
Brake fluid type: DOT- 4
NOTE:
Make sure there is no fluid leaking.
Check for fluid deterioration or crack on the brake
hoses and fittings.
MAINTENANCE
Replenishing Brake Fluid
1.Straighten the Handlebar, remove 2 fixing
screws and remove Reservoir Cover.
2.Replenish Reservoir with recommended
DOT-4 Brake Fluid to the Upper Scale. Install
Reservoir Cover and tighten 2 fixing screws.
3.Replace Brake Fluid every 10,000km or 1
year.
˙
When replenishing braking fluid, cover
painting parts with a cloth to prevent
damaging them.
˙ Mixed use of Brake Fluids of different
brand and different specifications may
result in braking fault and danger.
Reservoir Cover
WARNING
53

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dink-r150

Table of Contents