Feature Rollback Example - HP 10500 Series Configuration Manual

flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2111.bin
Active packages on chassis 1 slot 1:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2111.bin
Active packages on chassis 2 slot 0:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2111.bin
Active packages on chassis 2 slot 1:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2111.bin

Feature rollback example

Rollback requirement
As shown in
MPU in slot 1 (the standby MPU). R21 1 1 and R21 10 are compatible.
Roll back the feature1 feature from R21 1 1 to R21 10 after upgrading it from R21 10 to R21 1 1.
Figure 44 Network diagram
Internet
2.2.2.2/24
TFTP server
Upgrade procedure
# Download the upgrade image from the TFTP server.
<Sysname> tftp 2.2.2.2 get feature1-r2111.bin
% Total
100 256k
# Display active software images.
<Sysname> display install active
Active packages on chassis 1 slot 0:
flash:/boot-r2110.bin
Figure 44, each member in the IRF fabric has one MPU in slot 0 (the active MPU) and one
Master
(Member_ID=1)
1.1.1.1/24
Note: The orange line represents an IRF connection.
% Received % Xferd
100 256k 0
Subordinate
(Member_ID=2)
IRF
Average Speed
Dload Upload
0 764k 0 --:--:-- --:--:-- --:--:--
141
Time Time Time
Total Spent Left
Current
Speed
810k