HP 10500 Series Configuration Manual page 85

[Sysname-luser-abc] service-type ftp
[Sysname-luser-abc] quit
NOTE:
If the password control feature is configured, the password must meet the password requirements
defined by the feature. For more information, see
# Enable the FTP server.
[Sysname] ftp server enable
[Sysname] quit
# Examine the storage space for space insufficiency and delete unused files for more free space.
<Sysname> dir
Directory of flash:
0 -rw-
1 -rw-
2 drw-
3 drw-
4 drw-
5 -rw-
6 -rw-
7 -rw-
8 -rw-
9 -rw-
473664 KB total (467080 KB free)
<Sysname> delete /unreserved flash:/backup.bin
3. Perform FTP operations from the PC (FTP client):
# Log in to the FTP server at 1.1.1.1 using the username abc and password 123456.
c:\> ftp 1.1.1.1
Connected to 1.1.1.1.
220 FTP service ready.
User(1.1.1.1:(none)):abc
331 Password required for abc.
Password:
230 User logged in.
# Use the ASCII mode to download the configuration file startup.cfg from the device to the PC for
backup.
ftp> ascii
200 TYPE is now ASCII
ftp> get startup.cfg back-startup.cfg
# Use the binary mode to upload the file temp.bin from the PC to the Flash root directory of the
active MPU.
ftp> binary
200 TYPE is now 8-bit binary
ftp> put temp.bin
# Exit FTP.
ftp> bye
0 Sep 27 2010 14:43:34
0 Sep 27 2010 14:43:34
- Jun 29 2011 18:30:38
- Jun 21 2011 14:51:38
- Jun 21 2011 14:51:38
2943 Jul 02 2011 08:03:08
63901 Jul 02 2011 08:03:08
716 Jun 21 2011 14:58:02
572 Jun 21 2011 14:58:02
6541264 Aug 04 2011 20:40:49
77
Security Configuration Guide
kernel.bin
base.bin
logfile
diagfile
seclog
startup.cfg
startup.mdb
hostkey
serverkey
backup.bin
.