Issu Examples For Using Issu Series Commands In Irf Mode; Feature Upgrade To A Compatible Version - HP 10500 Series Configuration Manual

# Verify that both MPUs are running the old image.
Active packages on slot 0:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2110.bin
Active packages on slot 1:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2110.bin
ISSU examples for using issu series commands in
IRF mode

Feature upgrade to a compatible version

Upgrade requirement
As shown in
MPU in slot 1 (the standby MPU).
Upgrade the feature1 feature from R21 10 to R21 1 1. The two versions are ISSU-compatible versions.
Figure 42 Network diagram
Internet
2.2.2.2/24
TFTP server
Upgrade procedure
# Download the upgrade image from the TFTP server.
<Sysname> tftp 2.2.2.2 get feature1-r2111.bin
% Total
100 256k
# Display active software images.
<Sysname> display install active
Active packages on chassis 1 slot 0:
flash:/boot-r2110.bin
flash:/system-r2110.bin
Figure 42, each member in the IRF fabric has one MPU in slot 0 (the active MPU) and one
Master
(Member_ID=1)
1.1.1.1/24
Note: The orange line represents an IRF connection.
% Received % Xferd
100 256k 0
Subordinate
(Member_ID=2)
IRF
Average Speed
Dload Upload
0 764k 0 --:--:-- --:--:-- --:--:--
136
Time Time Time
Total Spent Left
Current
Speed
810k