Performing An Issu By Using Install Series Commands; Performing An Issu; Obtaining And Decompressing An .Ipe File; Installing Or Upgrading Software Images - HP 10500 Series Configuration Manual

Performing an ISSU by using install series
commands

Performing an ISSU

Obtaining and decompressing an .ipe file

If the software images are contained in an .ipe file, you must obtain and decompress the .ipe file before
starting the ISSU.
To obtain and decompress an .ipe file:
Step
1. Transfer the .ipe file to the root directory of
the storage medium on the active MPU (in
standalone mode) or global active MPU
(in IRF mode).
2. Identify the images in the .ipe file in any
view.
3. Decompress the .ipe file in user view.

Installing or upgrading software images

You can install or upgrade a software image with the install activate command. If you use this command
for an image that does not exist on the device, you install the image. If you use this command for an
image that already exists on the device, you upgrade the image.
To install or upgrade multiple images with the install activate command, use one of the following
methods:
Slot by slot—For each slot, use a single command to activate all the images.
•
Image by image—Activate one image on all slots before activating another image.
•
In standalone mode:
To install a feature image or patch image, you must install it on the active MPU first.
•
To upgrade an image, you must upgrade the image on the standby MPU first.
•
In IRF mode:
To install a feature image or patch image, you must install the image on the master first. To install
•
an image on a member, you must install the image on the active MPU first.
To upgrade a feature image or patch image, you must upgrade the image on one subordinate
•
member first. To upgrade an image on a member, you must upgrade the image on the standby
MPU first.
Command
See FTP or TFTP configuration in this guide.
display install ipe-info
install add ipe-filename medium-name:
145