HP 10500 Series Configuration Manual page 201

Hide thumbs Also See for 10500 Series:
Table of Contents

Advertisement

[Device-mdc-3-MDCB] mdc start
It will take some time to start MDC...
This MDC was started successfully.
[Device-mdc-3-MDCB] quit
# Log in to MDCB from the default MDC. Press Ctrl+D as prompted to access the CLI of MDCB.
[Device] switchto mdc MDCB
******************************************************************************
* Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
******************************************************************************
Automatic configuration is running, press CTRL_D to break or press CTRL_B to
switch back to the default MDC.
<Device> system-view
# Change the device name to MDCB for easy identification of the MDC.
[Device] sysname MDCB
# To enable the MDC administrator to remotely manage the MDC, assign an IP address to the
management Ethernet interface and enable the Telnet service.
[MDCB] interface M-GigabitEthernet 0/0/0
[MDCB-M-GigabitEthernet0/0/0] ip address 192.168.2.252 24
[MDCB-M-GigabitEthernet0/0/0] quit
[MDCB] telnet server enable
[MDCB] user-interface vty 0 63
[MDCB-line-vty0-63] authentication-mode none
[MDCB-line-vty0-63] user-role mdc-admin
# Return to the default MDC.
[MDCB-line-vty0-63] return
<MDCB> switchback
[Device]
3.
Create and configure MDCC for Department C:
# Create MDCC.
[Device] mdc MDCC
Executing this command will create MDC MDCC ID 4 and empty folder /mdc/mdc4 in the
root directory of the storage media. Continue? [Y/N]:y
This MDC was created successfully.
# Reclaim the interface card in slot 5 from the default MDC and assign it to MDCC.
[Device-mdc-4-MDCC] mdc Admin
[Device-mdc-1-Admin] undo location slot 5
The configuration associated with the specified slot of MDC will be lost. Continue?
[Y/N]:y
[Device-mdc-4-Admin] mdc MDCC
[Device-mdc-4-MDCC] location slot 5
# Assign interfaces Ten-GigabitEthernet 5/0/1 through Ten-GigabitEthernet 5/0/48 to MDCC.
[Device-mdc-4-MDCC] allocate interface ten-gigabitethernet 5/0/1 to
ten-gigabitethernet 5/0/48
The configurations of the interfaces will be lost. Continue? [Y/N]:y
# Set the CPU weight of MDCC to 5.
193
*
*
*

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents