HP 10500 Series Configuration Manual page 98

Format
drive:/[path]/file-name
Table 12 File name formats in IRF mode
Format
file-name
[path/]file-name
drive:/[path]/file-name
Description
Specifies a file in a specific storage
medium.
The drive argument represents the
storage medium name.
The storage medium on the active
MPU is typically flash.
The storage medium on the standby
MPU is typically slotn#flash, where n
represents the number of the slot that
hosts the standby MPU, for example,
slot16#flash. To view the
correspondence between an MPU
and its slot number, use the display
device command.
Description
Specifies a file in the current working
directory.
Specifies a file in a specific folder in the
current working directory.
The path argument represents the path
to the file. If the file is in a single-level
folder, specify the folder name for the
argument. If the file is in a nested
folder, separate each folder name by a
forward slash (/).
Specifies a file in a specific storage
medium on the device.
The drive argument represents the
storage medium name.
The storage medium on the active MPU
of the master is typically flash.
The storage medium on a subordinate
device is typically
chassism#slotn#flash, where m
represents the member ID of the
subordinate device and n represents
the slot number of the MPU.
To view the correspondence between a
member device and its member ID, use
the display irf command.
90
Example
•
flash:/test/a.cfg indicates a file named
a.cfg in the test folder in the root
directory of the Flash on the active MPU.
•
slot16#flash:/a.cfg indicates a file
named a.cfg in the root directory of the
Flash on the standby MPU.
Example
a.cfg indicates a file named a.cfg in the
current working directory.
This working directory might be on any
MPU in the IRF fabric.
•
test/a.cfg indicates a file named a.cfg
in the test folder in the current working
directory.
•
test/subtest/a.cfg indicates a file
named a.cfg in the subtest subfolder
of the test folder in the current working
directory.
•
flash:/test/a.cfg indicates a file
named a.cfg in the test folder in the
root directory of the Flash on the
global active MPU of the IRF fabric.
•
chassis2#slot16#flash:/a.cfg
indicates a file named a.cfg in the
root directory of the Flash on the
standby MPU in slot 16 on member
device 2.