HP 10500 Series Configuration Manual page 88

Step
4. Log in to the FTP server.
To establish an IPv6 FTP connection:
Step
Enter system view.
1.
2. (Optional.) Specify the source
IPv6 address for FTP packets
sent by the FTP client.
3. Return to user view.
4. Log in to the FTP server.
Command
•
(Method 1) Log in to the FTP server
directly in user view:
ftp [ ftp-server [ service-port ]
[ vpn-instance vpn-instance-name ]
[ dscp dscp-value | source { interface
interface-type interface-number | ip
source-ip-address } ] ] *
•
(Method 2) Log in to the FTP server in
FTP client view:
a. ftp
b. open server-address
[ service-port ]
Command
system-view
ftp client ipv6 source { interface
interface-type interface-number |
ipv6 source-ipv6-address }
quit
•
Log in to the FTP server directly
in user view:
ftp ipv6 [ ftp-server
[ service-port ] [ vpn-instance
vpn-instance-name ] [ dscp
dscp-value | source { ipv6
source-ipv6-address | interface
interface-type
interface-number } ] * [ -i
interface-type
interface-number ]
•
Log in to the FTP server in FTP
client view:
a. ftp ipv6
b. open server-address
[ service-port ]
80
Remarks
Use either method.
The source IP address
specified in the ftp command
takes precedence over the
one set by the ftp client source
command.
Remarks
N/A
By default, no source IPv6 address
is specified. The source address is
automatically selected as defined
in RFC 3484.
N/A
Use either method.
The source IP address specified in
the ftp ipv6 command takes
precedence over the one set by the
ftp client ipv6 source command.