Issu Examples For Using Install Series Commands In Irf Mode; Feature Upgrade Example - HP 10500 Series Configuration Manual

flash:/feature1-r2110.bin
# Confirm the software change.
<Sysname> install commit
ISSU examples for using install series commands in
IRF mode

Feature upgrade example

Upgrade requirement
As shown in
the subordinate member with the member ID 2. Each member has one MPU in slot 0 (active MPU) and
one MPU in slot 1 (standby MPU).
Upgrade the feature1 feature from R21 1 1 to R21 10. The two versions are ISSU-compatible versions.
Figure 46 Network diagram
Internet
2.2.2.2/24
TFTP server
Upgrade procedure
# Download the upgrade .ipe file from the TFTP server.
<Sysname> tftp 2.2.2.2 get feature1-r2111.ipe
% Total
100 256k
# Decompress the .ipe file.
<Sysname> install add flash:/feature1-r2111.ipe flash:
# Display active software images.
<Sysname> display install active
Active packages on chassis 1 slot 0:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2110.bin
Active packages on chassis 1 slot 1:
flash:/boot-r2110.bin
Figure 46, the IRF fabric has two members: the master member with the member ID 1 and
Master
(Member_ID=1)
1.1.1.1/24
Note: The orange line represents an IRF connection.
% Received % Xferd
100 256k 0
Subordinate
(Member_ID=2)
IRF
Average Speed
Dload Upload
0 764k 0 --:--:-- --:--:-- --:--:--
152
Time Time Time
Total Spent Left
Current
Speed
810k