Specifying A Memory Space Percentage For An Mdc; Starting An Mdc; Accessing An Mdc - HP 10500 Series Configuration Manual

Hide thumbs Also See for 10500 Series:
Table of Contents

Advertisement

Step
1.
Enter system view.
2.
Enter MDC view.
3.
Specify a disk
space percentage
for the MDC.

Specifying a memory space percentage for an MDC

All MDCs share and compete for the memory space of the MPUs in the system. If an MDC occupies too
much memory space, the other MDCs might not be able to operate correctly. To avoid this problem,
specify a memory space percentage for each MDC.
Before you specify a memory space percentage for an MDC, use the display mdc resource command to
view how much memory space the MDC is using. Make sure the memory space you assign to an MDC
is sufficient for the MDC to operate correctly.
To specify a memory space percentage for an MDC:
Step
1.
Enter system view.
2.
Enter MDC view.
3.
Specify a memory space
percentage for the MDC.

Starting an MDC

Step
1.
Enter system view.
2.
Enter MDC view.
3.
Start the MDC.

Accessing an MDC

A non-default MDC operates in the same way as a standalone device. From the system view of the default
MDC, you can log in to a non-default MDC and enter MDC system view. In MDC system view, you can
assign an IP address to the management Ethernet interface, or create a VLAN interface on the MDC and
Command
system-view
mdc mdc-name [ id mdc-id ]
In standalone mode:
limit-resource disk slot slot-number ratio
limit-ratio
In IRF mode:
limit-resource disk chassis chassis-number slot
slot-number ratio limit-ratio
Command
system-view
mdc mdc-name [ id mdc-id ]
In standalone mode:
limit-resource memory slot
slot-number ratio limit-ratio
In IRF mode:
limit-resource memory chassis
chassis-number slot slot-number
ratio limit-ratio
189
Remarks
N/A
N/A
By default, all MDCs share the
memory space on the MPUs in the
system, and an MDC can use all
the free memory space.
Command
system-view
mdc mdc-name [ id mdc-id ]
mdc start
Remarks
N/A
N/A
By default, all MDCs share
the disk space on the MPUs
in the system, and an MDC
can use all the free disk
space.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents