HP A6600 Configuration Manual page 222

[RouterA-GigabitEthernet4/1/1] quit
[RouterA] interface gigabitethernet 4/1/2
[RouterA-GigabitEthernet4/1/2] lldp enable
[RouterA-GigabitEthernet4/1/2] lldp admin-status txrx
[RouterA-GigabitEthernet4/1/2] lldp compliance admin-status cdp txrx
[RouterA-GigabitEthernet4/1/2] quit
Verify the configuration
3.
# Display the neighbor information on Router A.
[RouterA] display lldp neighbor-information
CDP neighbor-information of port 1[GigabitEthernet4/1/1]:
CDP neighbor index : 1
Chassis ID
Port ID
Software version
Platform
Duplex
CDP neighbor-information of port 2[GigabitEthernet4/1/2]:
CDP neighbor index : 2
Chassis ID
Port ID
Software version
Platform
Duplex
As the sample output shows, Router A has discovered the IP phones connected to GigabitEthernet 4/1/1
and GigabitEthernet 4/1/2, and has obtained their LLDP device information.
: SEP00141CBCDBFE
: Port 1
: P0030301MFG2
: Cisco IP Phone 7960
: Full
: SEP00141CBCDBFF
: Port 1
: P0030301MFG2
: Cisco IP Phone 7960
: Full
215