Isolate-User-Vlan Configuration Example - HP A6600 Configuration Manual

Isolate-user-VLAN configuration example

Network requirements
As shown in
• Connect Router A to downstream routers Router B and Router C.
Configure VLAN 5 on Router B as an isolate-user-VLAN, assign the uplink port GigabitEthernet
•
4/1/5 to VLAN 5, and associate VLAN 5 with secondary VLANs VLAN 2 and VLAN 3. Assign
GigabitEthernet 4/1/2 to VLAN 2 and GigabitEthernet 4/1/1 to VLAN 3.
Configure VLAN 6 on Router C as an isolate-user-VLAN, assign the uplink port GigabitEthernet
•
4/1/5 to VLAN 6, and associate VLAN 6 with secondary VLANs VLAN 3 and VLAN 4. Assign
GigabitEthernet 4/1/3 to VLAN 3 and GigabitEthernet 4/1/4 to VLAN 4.
As far as Router A is concerned, Router B only has VLAN 5 and Router C only has VLAN 6.
•
Figure 38 Network diagram for isolate-user-VLAN configuration
VLAN 3
Host A
Host B
VLAN 2
Configuration procedure
The following part provides only the configuration on Router B and Router C.
Configure Router B
1.
# Configure the isolate-user-VLAN.
<RouterB> system-view
[RouterB] vlan 5
[RouterB-vlan5] isolate-user-vlan enable
[RouterB-vlan5] port gigabitEthernet 4/1/5
[RouterB-vlan5] quit
# Configure the secondary VLANs.
[RouterB] vlan 3
[RouterB-vlan3] port gigabitEthernet 4/1/1
[RouterB-vlan3] quit
[RouterB] vlan 2
[RouterB-vlan2] port gigabitEthernet 4/1/2
[RouterB-vlan2] quit
# Associate the isolate-user-VLAN with the secondary VLANs.
[RouterB] isolate-user-vlan 5 secondary 2 to 3
Figure 38,
VLAN 5
GE4/1/5
Router B
VLAN 6
GE4/1/5
Router C
Router A
116
VLAN 3
Host C
Host D
VLAN 4