HP A6600 Configuration Manual page 124

Configure Router C
2.
# Configure the isolate-user-VLAN.
<RouterC> system-view
[RouterC] vlan 6
[RouterC-vlan6] isolate-user-vlan enable
[RouterC-vlan6] port gigabitEthernet 4/1/5
[RouterC-vlan6] quit
# Configure the secondary VLANs.
[RouterC] vlan 3
[RouterC-vlan3] port gigabitEthernet 4/1/3
[RouterC-vlan3] quit
[RouterC] vlan 4
[RouterC-vlan4] port gigabitEthernet 1/4
# Associate the isolate-user-VLAN with the secondary VLANs.
[RouterC-vlan4] quit
[RouterC] isolate-user-vlan 6 secondary 3 to 4
Verification
# Display the isolate-user-VLAN configuration on Router B.
[RouterB] display isolate-user-vlan
Isolate-user-VLAN VLAN ID : 5
Secondary VLAN ID : 2-3
VLAN ID: 5
VLAN Type: static
Isolate-user-VLAN type : isolate-user-VLAN
Route Interface: not configured
Description: VLAN 0005
Name: VLAN 0005
Broadcast MAX-ratio: 100%
Tagged Ports: none
Untagged Ports:
GigabitEthernet4/1/1
VLAN ID: 2
VLAN Type: static
Isolate-user-VLAN type : secondary
Route Interface: not configured
Description: VLAN 0002
Name: VLAN 0002
Broadcast MAX-ratio: 100%
Tagged Ports: none
Untagged Ports:
GigabitEthernet4/1/2
VLAN ID: 3
VLAN Type: static
GigabitEthernet4/1/2
GigabitEthernet4/1/5
117
GigabitEthernet4/1/5