Displaying And Maintaining Isolate-User-Vlan - HP A6600 Configuration Manual

To configure an isolate-user-VLAN:
To do...
1. Enter system view
2. Create a VLAN and enter VLAN
view
Configure the VLAN as an
3.
isolate-user-VLAN
4. Return to system view
5. Assign access or hybrid ports to
the isolate-user-VLAN and ensure
that at least one port takes the
isolate-user-VLAN as its default
VLAN
6. Return to system view
7. Create secondary VLANs
8. Configure Layer 2 isolation
between ports in the same
secondary VLAN
9. Quit to system view
10. Assign access or hybrid ports to
each secondary VLAN and
ensure that at least one port in a
secondary VLAN takes the
secondary VLAN as its default
VLAN
11. Return to system view
12. Associate the isolate-user-VLAN
with the specified secondary
VLANs
After associating an isolate-user-VLAN with the specified secondary VLANs, you cannot add/remove a
port to/from each involved VLAN or remove each involved VLAN. To do that, you must cancel the
association first.

Displaying and maintaining isolate-user-VLAN

To do...
Display the mapping between an
isolate-user-VLAN and its secondary
VLANs
Use the command
system-view
vlan vlan-id
isolate-user-vlan enable
quit
For the configuration
procedure, see the chapter
"VLAN configuration."
quit
vlan { vlan-id1 [ to vlan-id2 ] |
all }
isolated-vlan enable
quit
For the configuration
procedure, see the chapter
"VLAN configuration."
quit
isolate-user-vlan
isolate-user-vlan-id secondary
secondary-vlan-id [ to
secondary-vlan-id ]
Use the command...
display isolate-user-vlan
[ isolate-user-vlan-id ] [ | { begin |
exclude | include } regular-expression ]
115
Remarks
—
—
Required.
—
Required.
—
Required.
Optional.
By default, ports in the same
secondary VLAN can
communicate with one another at
Layer 2.
This configuration takes effect only
after you associate the secondary
VLANs with an isolate-user-VLAN.
—
Required.
—
Required.
Remarks
Available in any view