Configuring Vlan Mapping; Configuring One-To-One Vlan Mapping - HP A6600 Configuration Manual

Two-to-two VLAN mapping
Implement two-to-two VLAN mapping through the following configurations, as shown in
For uplink traffic, apply an inbound policy on the customer-side port to replace the SVLAN with a
•
new SVLAN, and apply an outbound policy on the network-side port to replace the CVLAN with a
new CVLAN.
For downlink traffic, apply an outbound policy on the customer-side port to replace the double tags
•
with the original VLAN tag pair.
Figure 71 Two-to-two VLAN mapping implementation

Configuring VLAN mapping

Use the VLAN mapping methods as appropriate to the roles of your routers in the network, as described
in this table:
Task

Configuring one-to-one VLAN mapping

Configuring one-to-two VLAN mapping
Configuring two-to-two VLAN mapping
Configuring one-to-one VLAN mapping
Perform one-to-one VLAN mapping on wiring-closet routers (see
and traffic type.
Perform these tasks to configure one-to-one VLAN mapping:
Task
Configuring an uplink policy
Configuring a downlink policy
Configuring the customer-side
Configuring the network-side port
Router role
Wiring-closet router
Edge device between SP networks
Edge device between SP networks
Description
Creates CVLAN-to-SVLAN mappings (required).
Creates SVLAN-to-CVLAN mappings (required).
Configures settings required for one-to-one VLAN mapping
port
(required).
Configures VLAN settings required for normal communication
(required).
183
Figure 66) to isolate traffic by both user
Figure 71.