Setting The 802.1P Priority In Svlan Tags - HP FlexFabric 12900 Series Configuration Manual

Step
1. Enter system view.
2. Enter Layer 2 Ethernet
interface view or Layer 2
aggregate interface view.
3. Configure the SVLAN TPID.

Setting the 802.1p priority in SVLAN tags

By default, a QinQ-enabled port copies the 802.1p priority in the CVLAN tag to the SVLAN tag. For
untagged frames, the port adds the port priority as the 802.1p priority.
To set the 802.1p priority in SVLAN tags:
Step
1. Enter system view.
2. Create a traffic class and
enter traffic class view.
3. Configure CVLAN match
criteria.
4. Return to system view.
5. Create a traffic behavior
and enter traffic behavior
view.
6. Configure a priority
marking action for SVLAN
tags.
7. Return to system view.
8. Create a QoS policy and
enter QoS policy view.
Command
system-view
interface interface-type
interface-number
qinq ethernet-type service-tag
hex-value
Command
system-view
traffic classifier classifier-name [ operator { and
| or } ]
•
Match CVLAN IDs:
if-match customer-vlan-id vlan-id-list
•
Match 802.1p priority:
if-match customer-dot1p
dot1p-value&<1-8>
quit
traffic behavior behavior-name
•
Replace the priority in the SVLAN tags of
matching frames with the configured
priority:
remark dot1p dot1p-value
•
Copy the 802.1p priority in the CVLAN tag
to the SVLAN tag:
remark dot1p customer-dot1p-trust
quit
qos policy policy-name
156
Remarks
N/A
N/A
The default setting is 0x8100 for
SVLAN tags.
Remarks
N/A
By default, no traffic class
is configured.
N/A
N/A
N/A
N/A
N/A
N/A