Controls - Source Audio Nemesis Delay User Manual

Controls

Pedal Input Switch
Time Knob
Engine Selector
Feedback Knob
Mod Knob
On/Off LED
On/Off Footswitch
Preset Select/Save Button
Knobs
Time Knob
Sets the delay time of tap 1, which is the main delay time. If an effect engine is selected that includes
multiple taps, additional taps will scale automatically. Turning the T
active will skew the audio, creating a pitch shift. Note that different engines will have unique ranges
of delay times available on the TIME knob. For instance, the time range on ANALOG is limited from
40ms to 1.2 sec since that range is typical of analog delays. SLAPBACK has a maximum delay of
220ms. The maximum delay time for any engine is adjustable as a Neuro App parameter.
Controlling Tap 2 Delay Time with the Time Knob
The TIME knob can also be used to adjust the delay time of tap 2 by turning the TIME knob while
holding the CONTROL INPUT button. This allows tap 2 to be set to a limited number options without
needing to use the Neuro App. There are four delay times for tap 2 relative to tap 1 time:
SA260
Control LED
3
2/3
Swing 8ths
1/2
8ths
Nemesis Delay User's Guide
Control Input Button
Preset LEDs
K while the delay engine is
IME NOB
3/4
Dotted 8ths
1
Quarters
Mix Knob
Intensity Knob
Rate Knob
Subdivision Switch
Tap LED
Tap Footswitch
19