Source Audio Nemesis Delay User Manual page 21

(pitch) modulation for the delay time, which can be used to create nice vibrato and chorus sounds.
For some engines, the MOD knob controls tape modulation, filter modulation, or tremolo depth.
Refer to the Delay Engines section of the user's guide for details.
Rate Knob
Controls the speed of the modulation LFO. This can affect different aspects of the sound depending
on which delay engine is selected. Usually, it controls the rate of time modulation but may also
control the tape modulation, filter modulation, or tremolo speed.
For most delay engines, the R
For delay engines that emulate tape machines, the R
sound of the wow and flutter effects. The center setting of the knob is a typical tape speed, and
faster or slower speeds are available by turning the R
It is possible to lock the LFO rate to the delay time, creating interesting synchronized modulation. In
order to do this, enable the LFO Lock to Delay Time parameter using the Neuro App or MIDI control.
Intensity Knob
This is a single knob that changes the color and character of the sound. It controls several different
parameters, depending on the active delay engine. Details of the INTENSITY knob functionality are
available in the Delay Engines section.
Effect Engine Selector Encoder
This is the delay engine selector. It determines the overall engine and sets the function of other
knobs like the M K
OD
Effect Engine Selector LEDs
The D E LED
ELAY NGINE
works for the first 12 effect engines. If a user has activated one of the extended engines (engines 13
through 24), then none of these D
On/Off Footswitch
Enables or bypasses the delay effect using the selected Hardware Bypass mode. Or if Trails Mode is
selected, the footswitch will enable soft bypass with trails. The Hardware Bypass mode is set in the
Hardware Options menu of the Neuro App. Hardware Bypass mode is global parameter and NOT
saved per preset.
On/Off LED
The ON/OFF LED above the O
bypassed (not lit).
SA260
K goes from 0.1 Hz to 10 Hz.
ATE NOB
0.1 Hz
, R K , and I
NOB ATE NOB NTENSITY
that encircle the E
S NGINE
E
ELAY NGINE
/O F
N FF OOTSWITCH
Nemesis Delay User's Guide
1 Hz
10 Hz
K sets the tape speed, which affects the
ATE NOB
K up or down.
ATE NOB
K .
NOB
S indicate which engine is currently active. This
ELECTOR
LED will be lit.
S
indicates if the delay effect is active (lit green) or
21