Neuro App - Source Audio Nemesis Delay User Manual

expression: X and Y. These signal are carried on the two rings of the TRRS cable that comes from the
Hot Hand receiver. The Nemesis uses the X expression signal.
Configuring the Hot Hand
When the Hot Hand is connected to the Nemesis, follow these simple steps to calibrate it and map it
to control different effect parameters.
1. Press the C
ONTROL
2. Press and hold the C
(approximately one blink per second).
3. Move the Hot Hand ring over the range of motion you would like to use to control the
Nemesis. The easiest way to do this is to move the ring in the same way that you intend to
move it as you perform. The Nemesis will intelligently select the X or Y axis of the Hot Hand
automatically, based on the motion of the ring.
4. After setting Hot Hand range of motion, click the O
now complete, and the C
time to map the Hot Hand to the effect parameters.
5. Move the knob(s) you wish to control with the Hot Hand to their minimum desired position,
then click the O
per second). Note that you may control one or more knobs with the Hot Hand, up to four
total knobs.
6. Move the knob(s) you wish to control with the Hot Hand to the maximum desired position,
then click the O
7. After setting the minimum and maximum knob positions, the parameter mapping is
complete.

Neuro App

The Neuro App is available as a free download for iOS and Android devices. The Neuro App provides
access to a number of parameters that are not accessible on the Nemesis's control knobs, as well as a
number of additional effect engines such as filtered delay. In order to use the Neuro App, use the
included 3.5 mm to ¼" TRS cable to make a connection between the headphone jack on your mobile
device and the Nemesis's I
mobile devices headphone jack to remotely control the pedal. Make sure the headphone volume on
your mobile device is set to maximum when using the Neuro App for the most reliable device to
pedal communication.
SA260
Ground
Y Exp
I B to enable external control. The C
NPUT UTTON
I B
ONTROL NPUT UTTON
L will blink faster (about 2 blinks per second). Now, it is
ONTROL ED
/O F . The C
N FF OOTSWITCH
/O F . The C
N FF OOTSWITCH
2 jack. The Neuro App uses special audio signals sent over your
NPUT
Nemesis Delay User's Guide
Power
X Exp
until the C L begins to blink slowly
ONTROL ED
/O F
N FF OOTSWITCH
L will now blink even faster (about 4 blinks
ONTROL ED
L will now be lit solid red.
ONTROL ED
L should be lit red.
ONTROL ED
once. The calibration is
33