Filter; Gts - HP HSR6800 Command Reference Manual

Field
Green Action
Red Action
Expedited Forwarding
Redirect enable
Redirect type
Redirect destination

filter

Use filter to configure a traffic filtering action in a traffic behavior.
Use undo filter to delete the traffic filtering action.
Syntax
filter { deny | permit }
undo filter
Views
Traffic behavior view
Default command level
2: System level
Parameters
deny: Drops packets.
permit: Permits packet to pass through.
Examples
# Configure the traffic filtering action as deny in traffic behavior database.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] filter deny

gts

Use gts to configure a GTS action in a traffic behavior.
Use undo gts to delete a GTS action.
Syntax
gts cir committed-information-rate [ cbs committed-burst-size [ ebs excess-burst-size [ queue-length
queue-length ] ] ]
undo gts
Views
Traffic behavior view
Description
Action to be taken on green packets. For more information, see car.
Action to be taken on red packets. For more information, see car.
Information about expedited forwarding.
Traffic redirecting configuration information.
Traffic redirecting type: VLAN, CPU, interface, next hop, or
service-loop group.
Destination for traffic redirecting: VLAN ID, interface name, IP
address of the next hop, CPU, or service loopback group name.
46