Qos Cq - HP HSR6800 Command Reference Manual

|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command displays no default items. If no CQ list index is specified, this command displays the
configuration of all CQ lists.
Examples
# Display information about all CQ lists.
<Sysname> display qos cql
Current CQL Configuration:
List Queue
2 3
3 6
Related commands

qos cq

•
qos cql
•
qos cq
Use qos cq to apply a CQ list to an interface.
Use undo qos cq to restore the default.
Syntax
qos cq cql cql-index
undo qos cq
Default
The congestion management policy on an interface is FIFO.
Views
Interface view, PVC view
Default command level
2: System level
Parameters
cql-index: CQ list index in the range of 1 to 16.
Usage guidelines
All physical interfaces can use CQ.
An interface can use only one CQ list.
You can configure multiple match criteria for a CQ list. During traffic classification, the system matches
packets with the rules in the CQ list. If a packet matches a certain rule, the packet is assigned to the
Params
Protocol ip fragments
Length 100
93