Wfq Commands; Display Qos Wfq Interface - HP HSR6800 Command Reference Manual

Queue
4
5
6
7
Usage guidelines
Settings in interface view take effect on the current interface. Settings in port group view take effect on all
ports in the port group.
Examples
# Enable packet-based WRR queuing on GigabitEthernet 1/0/1, and assign queue 0, with the
scheduling weight 100, to WRR group 1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wrr weight
[Sysname-GigabitEthernet1/0/1] qos wrr 0 group 1 weight 100
Related commands
display qos wrr interface
•
qos wrr
•

WFQ commands

display qos wfq interface

Use display qos wfq interface to display the weighted fair queuing (WFQ) configuration on an interface.
Syntax
display qos wfq interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Weight
5
6
7
8
119