qos cql queue serving
•
•
qos cq
qos cql queue serving
Use qos cql queue serving to set the byte count for a custom queue on a CQ list.
Use undo qos cql queue serving to restore the default.
Syntax
qos cql cql-index queue queue-number serving byte-count
undo qos cql cql-index queue queue-number serving
Views
System view
Default command level
2: System level
Parameters
cql-index: CQ list index in the range of 1 to 16.
queue-number: Queue number in the range of 1 to 16.
byte-count: Number of bytes of packets that the specified queue sends in each cycle of queue scheduling.
The value range is 1 to 16777215 bytes, and the default is 1500 bytes.
Examples
# Set the byte count of packets to 1400 for queue 2 on CQ list 5.
<Sysname> system-view
[Sysname] qos cql 5 queue 2 serving 1400
Related commands
•
qos cql default-queue
qos cql protocol
•
•
qos cql queue
qos cq
•
WFQ commands
display qos wfq interface
Use display qos wfq interface to display weighted fair queuing (WFQ) configuration and statistics of an
interface or all interfaces.
Syntax
display qos wfq interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
97