Remark Mpls-Exp - HP HSR6800 Command Reference Manual

Related commands
qos pql protocol

remark mpls-exp

Use remark mpls-exp to remark the EXP value for MPLS packets.
Use undo remark mpls-exp to remove the configuration.
Syntax
remark mpls-exp exp-value
undo remark mpls-exp
Views
Traffic behavior view
Default command level
2: System level
Parameters
exp-value: EXP value in the range of 0 to 7.
Examples
# Set the EXP value to 0 for MPLS packets.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark mpls-exp 0
139